Tag Archives: stepper reducer

China high quality Pls/Ab/Nb Close Loop Stepper Series Servo Motor Speed Reducer NEMA23 NEMA34 NEMA 42 Planetary Gearbox sequential gearbox

Product Description

Product Description

Helical Gear Motor Box PAB 42mm Speed Reducer High Speed Small Planetary Gearbox

3F PAB series high precision planetary gearbox adopts the integrated design of planet carrier and output shaft to ensure the maximum torque stiffness and stability. Several backlash types can be chosen depends on customers’ needs: Micro precision backlash (P0), precision backlash (P1) and standard backlash (P2) are available. Thanks to the high cost performance of 3F PAB series planetary gearbox, it is widely used in motion control industries for servo application. 3F PAB precision gearboxes are featured with high torque and the input diameter D4 can be up to φ255mm, which can greatly meet the customer needs. Single-stage planetary gearboxes and two-stage gearboxes are available:

.One-stage ratio : 3, 4, 5, 6, 7, 8, 9, 10
.Two-stage ratio: 12, 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100
.Note: Three-stage technical data are not available in 3F catalogue. If needed, please contact our salesmen.

 

 

 

Overview of PAB Planetary Reducer

* The minimum backlash can reach to 0-3 arcmin.
* With the advantages of high High torque and high strength.
* It can be applied for any servo motors and stepper motor.
* The positioning time of starting and stoppingis shorter.
* High rigidity and high motor rotor inertia.
* Due to the miniaturization of motor power, it can achieve the stability of inertia load and small vibration.

Product Parameters

 

Product type   PLS60 PLS90 PLS115 PLS142 Reduction rqatio Number of stage

Rated output torque

N.M 30 75 150 400 3 1
40 100 200 560 4
50 110 210 700 5
37  62 148 450 8
27 45 125 305 10
77  120 260 910 12 2
68  110 210 780 15
77 120 260 910 16
77  110 260 910 20
68  110 210 780 25
77 120 260 910 32
68 110 210 780 40
37  62 148 450 64
27  45 125 305 100
Life Hour 30,000   
Instant stop torque N.M Two times of rated output torque  
 
Product type  PLS60 PLS90 PLS115 PLS142   Number of stage
max radial torque 3000  3900 4300 8200 N  
max axial torque 6000  9000 12000 19000 N  
Fullload efficiency 98 % 1
95 2
weight 3.0 4.3 9.0 15.4 kg 1
3.8 5.7 11.6 18.5 2
operating temperature -25ºC~+90ºC ºC  
IP lp65  
Lubirication type Lifetime lubrication  
Mounting type Any  
The max radial and axial torque work in the location of the center of output shaft when the out speed is 100RPM.

 

Detailed Photos

 

 

Application

 

 

Company Profile

 

Certifications

 

Packaging & Shipping

 

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Planetary
Step: Single-Step
Type: Gear Reducer
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

servo gearbox

Handling Backlash and Ensuring Precise Positioning in Servo Gearboxes

Servo gearboxes play a critical role in minimizing backlash and ensuring precise positioning in motion control systems:

1. Reduced Backlash Gearing: Many servo gearboxes utilize reduced backlash gearing technology. This involves designing gears with tighter tolerances and improved meshing profiles, resulting in minimal play between gear teeth. This reduces or eliminates backlash, which is essential for accurate motion control.

2. Preloading: Some servo gearboxes employ preloading mechanisms to remove any gaps between gears. By applying a controlled axial load to the gears, the meshing teeth remain in constant contact, eliminating backlash and enhancing precision.

3. Stiffness and Rigidity: Servo gearboxes are designed to be stiff and rigid, which helps minimize elastic deformation under load. This stiffness prevents gear teeth from deflecting, reducing the potential for backlash and maintaining accurate positioning.

4. High Gear Meshing Quality: The manufacturing process of servo gearboxes focuses on producing high-quality gears with precise tooth profiles and minimal manufacturing variations. This ensures consistent and smooth gear meshing, minimizing the likelihood of backlash.

5. Closed-Loop Control: Combining servo gearboxes with closed-loop control systems allows for real-time feedback on position and speed. Any deviation from the desired position can be quickly corrected by adjusting the motor’s output, compensating for any inherent backlash and ensuring precise positioning.

6. Advanced Gear Coatings: Some servo gearboxes incorporate advanced gear coatings or treatments that improve the meshing characteristics and reduce friction. This contributes to smoother gear engagement and minimizes backlash effects.

7. Inertia Matching: Properly matching the inertia of the load to the servo motor and gearbox combination reduces the likelihood of overshooting or oscillations during positioning. Accurate inertia matching enhances the control system’s ability to maintain precise positioning.

Servo gearboxes’ ability to handle backlash and ensure precise positioning is crucial for applications that require high accuracy, such as robotics, CNC machines, and automated manufacturing processes. By employing advanced design techniques and technologies, servo gearboxes contribute to achieving repeatable and accurate motion control.

servo gearbox

Contribution of Servo Gearboxes to Energy Efficiency in Automated Systems

Servo gearboxes play a crucial role in enhancing energy efficiency in various automated systems by addressing several key aspects:

1. Precise Control: Servo gearboxes enable precise and accurate control over motion, allowing automated systems to perform tasks with minimal wastage of energy. Precise positioning reduces the need for unnecessary movements and adjustments.

2. Variable Speed Operation: Servo gearboxes offer the flexibility to operate at different speeds based on the application’s requirements. This capability ensures that the system uses only the necessary amount of energy for a given task, avoiding excessive power consumption.

3. Reduced Inertia: Servo gearboxes are designed to minimize inertia, which is the resistance to changes in motion. Lower inertia results in quicker response times and less energy required to accelerate or decelerate moving parts.

4. Regenerative Braking: Some servo systems are equipped with regenerative braking mechanisms. During deceleration or braking, energy generated is fed back into the system or stored for later use, reducing energy wastage.

5. Dynamic Load Management: Servo gearboxes can adapt to varying load conditions in real-time. They adjust torque and speed based on the load, optimizing energy usage and preventing overconsumption of power.

6. Reduced Heat Generation: Efficient servo gearboxes produce less heat during operation, leading to lower energy losses. This reduction in heat generation contributes to overall energy efficiency and extends the lifespan of components.

7. Smart Control Algorithms: Modern servo systems incorporate intelligent control algorithms that optimize the use of energy. These algorithms manage power distribution, minimize idle time, and synchronize movements for optimal efficiency.

8. Energy Recovery: In certain applications, servo gearboxes can capture and reuse energy that would otherwise be dissipated as heat. This energy recovery further contributes to the overall energy efficiency of the system.

9. Low Friction Designs: Servo gearboxes often incorporate low-friction components and efficient lubrication systems to minimize energy losses due to friction.

10. Matched Components: Properly matched servo gearbox and motor combinations ensure that the system operates at its peak efficiency point, minimizing energy consumption.

By incorporating these energy-saving features and capabilities, servo gearboxes enhance the energy efficiency of automated systems, making them more environmentally friendly and cost-effective over the long term.

servo gearbox

Servo Gearbox: Function in Motion Control Systems

A servo gearbox is a specialized type of gearbox designed to work in conjunction with servo motors to achieve precise motion control in various applications. It functions as follows:

Motion Synchronization: A servo gearbox is used to synchronize the motion of a servo motor with the intended motion of a mechanical system. It ensures that the motor’s rotational output is accurately transmitted to the driven component.

Speed and Position Control: Servo gearboxes enable precise control over speed and position by converting the high-speed, low-torque output of a servo motor into a lower-speed, higher-torque output suitable for the specific application.

Reduction Ratio: The servo gearbox incorporates reduction stages to achieve the desired reduction ratio. This reduction allows the motor to provide higher torque while maintaining accurate speed control.

Backlash Minimization: High-precision servo gearboxes are designed to minimize backlash, which is the lost motion between input and output shafts. This is critical for accurate and responsive motion control.

High Efficiency: Servo gearboxes are designed for high efficiency to ensure that the majority of input power is effectively transferred to the output, reducing energy consumption.

Dynamic Response: Servo gearboxes enhance the dynamic response of motion control systems. They allow the servo motor to quickly start, stop, and change directions with minimal overshooting or oscillations.

Positioning Accuracy: By accurately converting the motor’s rotation into precise linear or angular movement, servo gearboxes ensure high positioning accuracy required in applications such as robotics, CNC machines, and automation systems.

Load Distribution: Servo gearboxes distribute the load evenly across gear teeth, enhancing the gearbox’s durability and minimizing wear.

Customization: Servo gearboxes are available in various sizes, reduction ratios, and configurations to suit different application requirements.

Overall, a servo gearbox is an integral component in motion control systems, allowing precise and efficient control over motion, speed, and position for a wide range of industrial applications.

China high quality Pls/Ab/Nb Close Loop Stepper Series Servo Motor Speed Reducer NEMA23 NEMA34 NEMA 42 Planetary Gearbox   sequential gearbox	China high quality Pls/Ab/Nb Close Loop Stepper Series Servo Motor Speed Reducer NEMA23 NEMA34 NEMA 42 Planetary Gearbox   sequential gearbox
editor by CX 2024-05-17

China Custom Newstart Hsr355 Heavy Duty Servo Planetary Reducer Gearbox for Servo Motor, Stepper Motor, AC Motor, DC Motor, Hydraulic Motor wholesaler

Product Description

Product Description

Ratio i 32 40 48 50 56 64 80
Nominal output torque Nm 13600 13600 12130 9000 11120 8950 9000
Maximum output torque Nm 27200 27200 24260 18000 22240 17900 18000

      CHINAMFG series: High efficiency, Low nosie
     *Size,speed ratio and performance are recommended and customized

 Core Feature

Structural feature

      Reducer output planetary frame adopts integrated nut to eliminate axial clearance design, the front and back tapered roller bearing large span distribution and the whole box, forming a super integrated structure, to ensure the improvement of torsional rigidity and has a super strong radial bearing capacity and axial bearing capacity, using a processing process to complete, to ensure a very high coaxiality.

      Gear ring of reducer adopts integral structure design.

      Reducer gear ring, planetary frame, input shaft are made of 40Cr high-quality structural steel, hot forging process, so as to obtain higher material density, than the use of casting box, round steel, with higher strength, rigidity, toughness.

Gear characteristics

      Real hard face spur gear, gear material is 20CrMnTi high quality alloy steel, after carburizing – grinding process processing, hardness up to HRC62, compared with ordinary steel 40Cr, 38CrMnTi surface nitriding treatment of gear has higher hardness, rigidity, toughness, wear resistance. The design and analysis technology of 3DSimulation is adopted to modify the tooth shape, tooth direction and follow the trimming, respectively, in order to reduce the noise of gear meshing and increase the service life of the gear train.

Application characteristics

      Long span tapered roller bearing arrangement output integral planetary architecture, so that the product has strong radial bearing capacity and excellent axial bearing capacity, and has high rigidity. High precision applications, frequent start-stop and load changes are

 

Installation Instructions

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Electric Cars, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step
Customization:
Available

|

Customized Request

servo gearbox

Handling Backlash and Ensuring Precise Positioning in Servo Gearboxes

Servo gearboxes play a critical role in minimizing backlash and ensuring precise positioning in motion control systems:

1. Reduced Backlash Gearing: Many servo gearboxes utilize reduced backlash gearing technology. This involves designing gears with tighter tolerances and improved meshing profiles, resulting in minimal play between gear teeth. This reduces or eliminates backlash, which is essential for accurate motion control.

2. Preloading: Some servo gearboxes employ preloading mechanisms to remove any gaps between gears. By applying a controlled axial load to the gears, the meshing teeth remain in constant contact, eliminating backlash and enhancing precision.

3. Stiffness and Rigidity: Servo gearboxes are designed to be stiff and rigid, which helps minimize elastic deformation under load. This stiffness prevents gear teeth from deflecting, reducing the potential for backlash and maintaining accurate positioning.

4. High Gear Meshing Quality: The manufacturing process of servo gearboxes focuses on producing high-quality gears with precise tooth profiles and minimal manufacturing variations. This ensures consistent and smooth gear meshing, minimizing the likelihood of backlash.

5. Closed-Loop Control: Combining servo gearboxes with closed-loop control systems allows for real-time feedback on position and speed. Any deviation from the desired position can be quickly corrected by adjusting the motor’s output, compensating for any inherent backlash and ensuring precise positioning.

6. Advanced Gear Coatings: Some servo gearboxes incorporate advanced gear coatings or treatments that improve the meshing characteristics and reduce friction. This contributes to smoother gear engagement and minimizes backlash effects.

7. Inertia Matching: Properly matching the inertia of the load to the servo motor and gearbox combination reduces the likelihood of overshooting or oscillations during positioning. Accurate inertia matching enhances the control system’s ability to maintain precise positioning.

Servo gearboxes’ ability to handle backlash and ensure precise positioning is crucial for applications that require high accuracy, such as robotics, CNC machines, and automated manufacturing processes. By employing advanced design techniques and technologies, servo gearboxes contribute to achieving repeatable and accurate motion control.

servo gearbox

Contribution of Servo Gearboxes to Energy Efficiency in Automated Systems

Servo gearboxes play a crucial role in enhancing energy efficiency in various automated systems by addressing several key aspects:

1. Precise Control: Servo gearboxes enable precise and accurate control over motion, allowing automated systems to perform tasks with minimal wastage of energy. Precise positioning reduces the need for unnecessary movements and adjustments.

2. Variable Speed Operation: Servo gearboxes offer the flexibility to operate at different speeds based on the application’s requirements. This capability ensures that the system uses only the necessary amount of energy for a given task, avoiding excessive power consumption.

3. Reduced Inertia: Servo gearboxes are designed to minimize inertia, which is the resistance to changes in motion. Lower inertia results in quicker response times and less energy required to accelerate or decelerate moving parts.

4. Regenerative Braking: Some servo systems are equipped with regenerative braking mechanisms. During deceleration or braking, energy generated is fed back into the system or stored for later use, reducing energy wastage.

5. Dynamic Load Management: Servo gearboxes can adapt to varying load conditions in real-time. They adjust torque and speed based on the load, optimizing energy usage and preventing overconsumption of power.

6. Reduced Heat Generation: Efficient servo gearboxes produce less heat during operation, leading to lower energy losses. This reduction in heat generation contributes to overall energy efficiency and extends the lifespan of components.

7. Smart Control Algorithms: Modern servo systems incorporate intelligent control algorithms that optimize the use of energy. These algorithms manage power distribution, minimize idle time, and synchronize movements for optimal efficiency.

8. Energy Recovery: In certain applications, servo gearboxes can capture and reuse energy that would otherwise be dissipated as heat. This energy recovery further contributes to the overall energy efficiency of the system.

9. Low Friction Designs: Servo gearboxes often incorporate low-friction components and efficient lubrication systems to minimize energy losses due to friction.

10. Matched Components: Properly matched servo gearbox and motor combinations ensure that the system operates at its peak efficiency point, minimizing energy consumption.

By incorporating these energy-saving features and capabilities, servo gearboxes enhance the energy efficiency of automated systems, making them more environmentally friendly and cost-effective over the long term.

servo gearbox

Benefits of Using a Servo Gearbox for Precise Motion Control

Servo gearboxes offer several advantages when it comes to achieving precise motion control in various applications:

1. Accuracy: Servo gearboxes provide exceptional accuracy in speed and position control, making them suitable for applications that require tight tolerances and precise movements.

2. Low Backlash: These gearboxes are designed to minimize backlash, which is essential for eliminating lost motion and ensuring accurate positioning.

3. High Torque Density: Servo gearboxes offer a high torque-to-size ratio, allowing them to handle significant loads while maintaining a compact footprint.

4. Dynamic Performance: They excel in dynamic performance, enabling rapid changes in speed and direction with minimal overshoot or settling time.

5. Responsiveness: Servo gearboxes respond quickly to control signals, making them ideal for applications that require rapid adjustments and changes in direction.

6. Smooth Operation: These gearboxes provide smooth and precise movement, critical for applications like robotics, where jerky or uneven motion can lead to inaccuracies or damage.

7. Reduces Maintenance: The accuracy and durability of servo gearboxes can reduce wear and tear on other components, leading to lower maintenance requirements.

8. Improved Efficiency: Servo gearboxes offer high efficiency in power transmission, contributing to energy savings and minimizing heat generation.

9. Customization: They can be tailored to specific application needs, including factors like reduction ratios, mounting options, and feedback compatibility.

10. Versatility: Servo gearboxes find application in various industries, including robotics, CNC machining, medical equipment, and automation.

Overall, the benefits of using a servo gearbox for precise motion control make them an essential component in applications that demand accuracy, responsiveness, and reliable performance.

China Custom Newstart Hsr355 Heavy Duty Servo Planetary Reducer Gearbox for Servo Motor, Stepper Motor, AC Motor, DC Motor, Hydraulic Motor   wholesaler China Custom Newstart Hsr355 Heavy Duty Servo Planetary Reducer Gearbox for Servo Motor, Stepper Motor, AC Motor, DC Motor, Hydraulic Motor   wholesaler
editor by CX 2024-05-16

China Custom AC Stepper Servo Motor Precision Planetary Reducer Gearbox manufacturer

Product Description

Packaging & Shipping

 

AC stepper servo motor precision planetary reducer gearbox
PLANETX planetary reduce

Planetary reducer square flange:
Planetary reducer is widely used in industrial products due to its small size, light weight, large torque, wide speed ratio range, high rigidity, high precision, high transmission efficiency, maintenance free and other characteristics.
The planetary reducer structure is composed of a sun gear and a planet gear to form an external mesh, and a planet gear and an internal gear ring to form an internal mesh, so that the planet gear can realize revolution while realizing self rotation and maximum transmission of guarantee force; The minimum speed ratio of single-stage reduction is 3, and the maximum speed ratio is generally not more than 10. Common reduction ratios are 3, 4, 5, 6, 7, 8, and 10. The number of reducer stages is generally not more than 3, and the speed ratio is not more than 1.
Most planetary reducers are used with servo motors to reduce speed, increase torque, increase inertia, and ensure return accuracy (the higher the return accuracy, the higher the price). The maximum rated input speed of planetary reducers can reach 12000 rpm (depending on the size of the reducer itself, the larger the reducer, the smaller the rated input speed), and the operating temperature is generally between – 40 ºC and 120 ºC.

 

High Performance Planetary Gear Motor Precision Speed Reducer WAB060 Design Planetary Gearbox

1.Planetary carrier and output shaft are intergrated structure to ensure maximum torsional rigidity. 2.Planetary wheel with full needle design, increase the contact area to improve the rigidity and output torque. 3.The Gear adopts low carbon alloy steel, through carburizing and quenching, surface hardness is HRC62, anti-impact and strong abrasion resistance. 4.Gears refer to foreign imported software-assisted design to obtain the best tooth shape to reduce noise. 5.The input terminal is connected to the motor shaft in a double-tight manner to obtain the maximum clamping force and zero backlash power transmission. 6.Adopt spiral bevel gear design, allow high output torque, more than 30% higher than straight bevel gear. 7.High tolerance input speed, more than 8 times higher than straight bevel gear input. 8.The meshing tooth imprint of spiral bevel gear has been optimized by optimum design, and the contact tooth surface load is uniform, and long running life. 9.Bevel gears are meshed by optimum motion error analysis and strict process control to ensure high precision running backlash. 10.IP65, anti-dust, anti-water; low backlash, <3arcmin; low noise, <58dB 11.high efficiency(96%);Gear grinding process;easy motor mounting;life-time lubrication;various figure diameters.

Q: How to get a quick quote
A: Please provide the following information when contacting us

  1. Motor brand
  2. Motor model
  3. Motor dimension drawing
  4. What is the gear ratio

Q: How long is your delivery date
A: We all install it now, but it takes 3-5 days if it is not non-standard. Non standard 10-15 days, depending on the specific situation
Q:Do you provide samples, free or extra
A: A: You can reserve 1 first, and purchase it on demand
 

Application: Machinery
Hardness: Hardened Tooth Surface
Installation: Any
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: 1-3
Customization:
Available

|

Customized Request

servo gearbox

Role of Servo Gearbox in Robotics and Automation

Servo gearboxes play a crucial role in enhancing the performance and precision of robotics and automation systems:

1. Precision Motion Control: In robotics and automation, precise control of movement is essential. Servo gearboxes provide accurate speed and position control, allowing robots to perform intricate tasks with high accuracy.

2. Efficient Power Transmission: Servo gearboxes efficiently transmit power from the motor to the robotic components, ensuring minimal energy loss and optimizing the overall system efficiency.

3. Dynamic Performance: Robots often require quick changes in direction, speed, and acceleration. Servo gearboxes excel in dynamic performance, enabling rapid adjustments and smooth motion changes.

4. Reducing Backlash: Backlash in gear systems can lead to imprecise movements. Servo gearboxes are designed to minimize backlash, resulting in accurate positioning and reduced lost motion.

5. Compact Design: Many robotic applications require compact and lightweight components. Servo gearboxes offer a high torque-to-size ratio, allowing robots to generate significant powerservo gearbox

Contribution of Servo Gearboxes to Smooth Acceleration and Deceleration

Servo gearboxes play a crucial role in ensuring smooth acceleration and deceleration of machinery in motion control systems:

1. Precise Control: Servo gearboxes provide precise control over the rotational speed and torque of the output shaft. This control allows for gradual and controlled changes in speed, resulting in smooth acceleration and deceleration.

2. Feedback Mechanism: Servo systems typically incorporate feedback devices such as encoders or resolvers. These devices continuously monitor the actual position and speed of the output shaft and provide real-time feedback to the controller. This feedback enables the controller to adjust the input signals to the servo gearbox, ensuring accurate and smooth motion transitions.

3. Dynamic Response: Servo gearboxes are designed for high dynamic response, meaning they can quickly adjust their speed and torque based on the controller’s commands. This responsiveness allows for rapid and smooth changes in speed and direction without sudden jerks or jolts.

4. Programmable Profiles: Many servo systems offer the capability to program acceleration and deceleration profiles. Engineers can define specific acceleration and deceleration curves tailored to the application’s requirements. These profiles ensure that the machinery achieves the desired speed changes gradually and smoothly.

5. Reduced Wear and Tear: The controlled and gradual acceleration and deceleration provided by servo gearboxes reduce the wear and tear on mechanical components. Sudden changes in speed can lead to shock loads and vibration, potentially damaging the machinery. Servo gearboxes help mitigate these effects, extending the lifespan of components.

6. Increased Productivity: Smooth acceleration and deceleration reduce the chances of product damage, improve product quality, and enhance the overall efficiency of the process. This is particularly important in applications where precise motion control is critical.

Overall, servo gearboxes contribute to the seamless acceleration and deceleration of machinery by providing accurate control, dynamic responsiveness, and programmable motion profiles. These features ensure that machinery can achieve the desired speed changes while maintaining precision, efficiency, and longevity.

while maintaining a small footprint.

6. Smooth and Silent Operation: The low backlash and precise gearing of servo gearboxes contribute to smooth and quiet operation, which is crucial in environments where noise and vibration can affect performance.

7. Feedback Integration: Servo gearboxes can integrate with various feedback devices, such as encoders, resolvers, and sensors, to provide accurate position and speed information to the control system.

8. Reliable and Repeatable Performance: The consistent and repeatable performance of servo gearboxes ensures that robots can execute taservo gearbox

Compatibility of Servo Gearbox with a Specific Motor

The compatibility between a servo gearbox and a specific motor depends on several key factors:

1. Mounting Configuration: The mounting interface of the servo gearbox and motor must be compatible. This includes the type of coupling, flange size, and bolt pattern. Proper alignment ensures efficient power transmission and minimizes mechanical stress.

2. Shaft Diameter and Keyway: The diameter and keyway of the motor shaft must match the input shaft of the servo gearbox. A precise fit prevents slippage and ensures accurate torque transmission.

3. Torque and Speed Ratings: The torque and speed requirements of the application should align with the torque and speed ratings of both the motor and gearbox. Oversizing or undersizing either component can lead to inefficient operation and premature wear.

4. Inertia Matching: Inertia matching between the motor and gearbox helps prevent resonance and oscillations in the system. An appropriate inertia match ensures smooth and precise motion control.

5. Backlash and Stiffness: The gearbox’s backlash (play in the gears) and stiffness characteristics should match the application’s requirements. Low backlash and high stiffness are crucial for accurate positioning tasks.

6. Efficiency and Heat Dissipation: The combined efficiency of the motor and gearbox affects the overall system efficiency. Inadequate efficiency can lead to energy losses and excessive heat generation.

7. Service Life and Maintenance: Compatibility also involves considering the expected service life and maintenance requirements. A well-matched motor-gearbox combination enhances the durability and reliability of the motion control system.

8. Control and Feedback: The control system’s capabilities, such as closed-loop control and feedback devices, play a role in determining compatibility. The motor and gearbox should provide the necessary interfaces for effective integration into the control system.

Manufacturers and engineers often provide guidelines and compatibility charts to assist in selecting the right servo gearbox for a specific motor. Considering these factors ensures optimal performance, efficiency, and longevity of the motion control system.

sks accurately and reliably over time.

9. Customization: Servo gearboxes can be customized to meet the specific requirements of different robotic applications, including factors like gear ratios, mounting options, and feedback compatibility.

10. Versatility: From industrial assembly lines to medical robotics, servo gearboxes find applications in a wide range of industries, contributing to improved automation and efficiency.

In summary, the role of a servo gearbox in robotics and automation is to provide the precise and efficient motion control necessary for robots to perform tasks with accuracy, speed, and reliability.

China Custom AC Stepper Servo Motor Precision Planetary Reducer Gearbox   manufacturer China Custom AC Stepper Servo Motor Precision Planetary Reducer Gearbox   manufacturer
editor by CX 2023-09-04

China wholesaler CZPT Helical Precision Speed Reducer Planetary Gearbox for Servo Stepper Motor Tool Industrial Automation Robotics Laser Cutting Machine GB090-10-P2 Gvb78 supplier

Product Description

TaiBang Motor Industry Group Co., Ltd.

The main products is induction motor, reversible motor, DC brush gear motor, DC brushless gear motor, CH/CV big gear motors, Planetary gear motor ,Worm gear motor etc, which used widely in various fields of manufacturing pipelining, transportation, food, medicine, printing, fabric, packing, office, apparatus, entertainment etc, and is the preferred and matched product for automatic machine. 

Model Instruction

GB090-10-P2

GB 090 571 P2
Reducer Series Code External Diameter Reduction Ratio Reducer Backlash
GB:High Precision Square Flange Output

GBR:High Precision Right Angle Square Flange Output

GE:High Precision Round Flange Output

GER:High Precision Right Round Flange Output

050:ø50mm
070:ø70mm
090:ø90mm
120:ø120mm
155:ø155mm
205:ø205mm
235:ø235mm
042:42x42mm
060:60x60mm
090:90x90mm
115:115x115mm
142:142x142mm
180:180x180mm
220:220x220mm
571 means 1:10 P0:High Precision Backlash

P1:Precision Backlash

P2:Standard Backlash

Main Technical Performance
 

Item Number of stage Reduction Ratio GB042 GB060 GB060A GB090 GB090A GB115 GB142 GB180 GB220
Rotary Inertia 1 3 0.03 0.16   0.61   3.25 9.21 28.98 69.61
4 0.03 0.14   0.48   2.74 7.54 23.67 54.37
5 0.03 0.13   0.47   2.71 7.42 23.29 53.27
6 0.03 0.13   0.45   2.65 7.25 22.75 51.72
7 0.03 0.13   0.45   2.62 7.14 22.48 50.97
8 0.03 0.13   0.44   2.58 7.07 22.59 50.84
9 0.03 0.13   0.44   2.57 7.04 22.53 50.63
10 0.03 0.13   0.44   2.57 7.03 22.51 50.56
2 15 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
20 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
25 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
30 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
35 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
40 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
45 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
50 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
60 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
70 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
80 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
90 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
100 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51

 

Item Number of stage GB042 GB060 GB060A GB90 GB090A GB115 GB142 GB180 GB220
Backlash(arcmin) High Precision P0 1       ≤1 ≤1 ≤1 ≤1 ≤1 ≤1
2           ≤3 ≤3 ≤3 ≤3
Precision P1 1 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3
2 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
Standard P2 1 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
2 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7
Torsional Rigidity(N.M/arcmin) 1 3 7 7 14 14 25 50 145 225
2 3 7 7 14 14 25 50 145 225
Noise(dB) 1,2 ≤56 ≤58 ≤58 ≤60 ≤60 ≤63 ≤65 ≤67 ≤70
Rated input speed(rpm) 1,2 5000 5000 5000 4000 4000 4000 3000 3000 2000
Max input speed(rpm) 1,2 10000 10000 10000 8000 8000 8000 6000 6000 4000

 Noise test standard:Distance 1m,no load.Measured with an input speed 3000rpm 

 

servo gearbox

Considerations for Selecting the Right Servo Gearbox for an Application

Choosing the appropriate servo gearbox for a specific application requires careful evaluation of several key factors:

1. Torque and Speed Requirements: Determine the required torque and speed characteristics of the application, ensuring that the chosen servo gearbox can provide the necessary output.

2. Gear Ratio: Calculate the ideal gear ratio based on the desired motion profile, acceleration, and deceleration requirements.

3. Mounting and Integration: Consider the available space and mechanical layout of the machinery to choose a servo gearbox with the appropriate mounting configuration.

4. Motor Compatibility: Ensure that the servo gearbox is compatible with the specific type and size of motor being used for the application.

5. Precision and Accuracy: Evaluate the level of precision required for the application’s motion control. Choose a servo gearbox that can deliver the necessary accuracy and repeatability.

6. Load Distribution: Analyze how the load will be distributed among the gears to prevent excessive wear and ensure optimal performance.

7. Backlash and Compliance: Consider the application’s tolerance for backlash and compliance. Choose a servo gearbox with low backlash if precise positioning is essential.

8. Environmental Conditions: Factor in the environmental conditions of the application, such as temperature, humidity, and exposure to contaminants. Choose a servo gearbox with suitable sealing and protection.

9. Lubrication: Determine the lubrication requirements of the gearbox and select a model that aligns with the application’s maintenance practices.

10. Overload and Shock: Consider potential overload and shock conditions the gearbox may experience. Choose a servo gearbox that can handle sudden changes in load without compromising performance.

11. Feedback Devices: If precise motion control is required, choose a servo gearbox that is compatible with the desired feedback devices, such as encoders or resolvers.

12. Efficiency: Evaluate the efficiency of the servo gearbox to ensure that it contributes to the overall energy efficiency of the system.

13. Service and Support: Select a reputable manufacturer that offers reliable technical support, documentation, and post-purchase services.

14. Budget: Balance the performance requirements of the application with the available budget to make an informed decision.

By carefully considering these factors, engineers and designers can confidently choose the right servo gearbox that meets the specific needs of their application, optimizing performance and productivity.

Application: Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Reduction
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Double-Step
Samplservo gearbox

The Role of Harmonic Drive Servo Gearboxes in Advanced Motion Control Systems

Harmonic Drive servo gearboxes play a crucial role in advanced motion control systems by offering several unique features:

1. High Precision: Harmonic Drive gearboxes are known for their exceptional precision due to the unique gear mechanism they employ. This precision is essential for achieving accurate and repeatable motion control.

2. Zero Backlash: Harmonic Drive gearboxes are designed with zero backlash, which means there is no lost motion between input and output. This feature ensures that the commanded motion is precisely transferred without any delays or inaccuracies.

3. Compact Design: Harmonic Drive gearboxes have a compact structure, making them suitable for applications with limited space. The compact design allows for easy integration into various systems.

4. High Torque Transmission: Despite their compact size, harmonic drive gearboxes can transmit high torque efficiently. This feature is essential for applications that require both high precision and high torque.

5. Smooth Motion: The unique wave generator mechanism in harmonic drive gearboxes contributes to smooth and continuous motion, which is particularly beneficial in applications involving robotic arms, satellite positioning, and more.

6. Reduction Ratios: Harmonic Drive gearboxes offer high reduction ratios in a single-stage, allowing for precise control of output motion even when input motion is at high speeds.

7. Low Maintenance: The absence of backlash and the use of high-quality materials result in reduced wear and maintenance requirements, enhancing the longevity of the gearbox.

8. Advanced Applications: Harmonic Drive gearboxes are commonly used in robotics, aerospace, medical equipment, automation, and other industries where precision and reliability are paramount.

Overall, harmonic drive servo gearboxes are a critical component in achieving advanced motion control, enabling engineers to design and operate complex systems with unparalleled precision and accuracy.

es:

US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

servo gearbox

Servo Gearbox: Function in Motion Control Systems

A servo gearbox is a specialized type of gearbox designed to work in conjunction with servo motors to achieve precise motion control in various applications. It functions as follows:

Motion Synchronization: A servo gearbox is used to synchronize the motion of a servo motor with the intended motion of a mechanical system. It ensures that the motor’s rotational output is accurately transmitted to the driven component.

Speed and Position Control: Servo gearboxes enable precise control over speed and position by converting the high-speed, low-torque output of a servo motor into a lower-speed, higher-torque output suitable for the specific application.

Reduction Ratio: The servo gearbox incorporates reduction stages to achieve the desired reduction ratio. This reduction allows the motor to provide higher torque while maintaining accurate speed control.

Backlash Minimization: High-precision servo gearboxes are designed to minimize backlash, which is the lost motion between input and output shafts. This is critical for accurate and responsive motion control.

High Efficiency: Servo gearboxes are designed for high efficiency to ensure that the majority of input power is effectively transferred to the output, reducing energy consumption.

Dynamic Response: Servo gearboxes enhance the dynamic response of motion control systems. They allow the servo motor to quickly start, stop, and change directions with minimal overshooting or oscillations.

Positioning Accuracy: By accurately converting the motor’s rotation into precise linear or angular movement, servo gearboxes ensure high positioning accuracy required in applications such as robotics, CNC machines, and automation systems.

Load Distribution: Servo gearboxes distribute the load evenly across gear teeth, enhancing the gearbox’s durability and minimizing wear.

Customization: Servo gearboxes are available in various sizes, reduction ratios, and configurations to suit different application requirements.

Overall, a servo gearbox is an integral component in motion control systems, allowing precise and efficient control over motion, speed, and position for a wide range of industrial applications.

China wholesaler CZPT Helical Precision Speed Reducer Planetary Gearbox for Servo Stepper Motor Tool Industrial Automation Robotics Laser Cutting Machine GB090-10-P2 Gvb78   supplier China wholesaler CZPT Helical Precision Speed Reducer Planetary Gearbox for Servo Stepper Motor Tool Industrial Automation Robotics Laser Cutting Machine GB090-10-P2 Gvb78   supplier
editor by CX 2023-08-16

China 151 RV30 Worm Reducer RV030 Worm Gearbox Speed Reducer NEMA23 for Stepper Motor aluminum worm gearbox

Error:获取session失败,

worm reducer

Worm reducer gearbox – What You Need to Know

When shopping for a Worm reducer gearbox, it is important to consider the functions and features of the unit. It is also important to take into account its cost. We will take a look at the different types of worm reducer gearboxes and the applications that they can be used for. This will help you choose the right unit for your application.

Features

Worm gears are popular in instruments that require fast stopping, such as elevators and lifts. Their soft materials allow them to absorb shock, which reduces the likelihood of failure. They are also beneficial in heavy-duty machines, such as rock crushers. Some manufacturers offer special worms with zero backlash and high-accuracy reduction.The worm reducer gearbox has a variety of features, including an axial pitch and a circular pitch. The axial pitch of the worm must match the circular pitch of the larger gear. Its threads are left or right-handed, and its lead angle is the distance a point on the thread travels during a revolution of the worm.The worm gear reducer gearbox is widely available, and gear manufacturers typically maintain a large inventory of them. Because worm gears are standardized, their mounting dimensions are generally uniform across manufacturers. This means that choosing one will not require you to change the height, length, or diameter of the output shaft. Worm gear reducer gearboxes also have dimensional consistency.Worm gears are very efficient. They have a high load capacity and a low friction coefficient. The worm gears also have a precise tooth profile, which reduces speed fluctuations and allows for quiet operation.

Functions

Worm gears have different functions. They can be used in a variety of applications. For instance, they can be used in elevators to reduce the load on the elevator. These gears also have low noise levels because they are made of dissimilar metals. Moreover, these gears can be used in elevators because they are suitable for this type of application. However, they need a single stage reducer gearbox to function properly.Another important feature of a worm reducer gearbox is that it can operate in reverse. This means that the input shaft turns backwards, while the output shaft rotates forwards. Examples of such applications include hand-cranked centrifuges, blacksmithing forge blowers, and the wind governor of musical boxes. Worm gears are available in different shapes and sizes, from gearsets to housed units. They can also be configured as multi-speed designs. Some manufacturers also offer special precision and zero-backlash worms.A worm reducer gearbox’s tooth form is important in determining the capacity of the device. Typically, a single-lead worm gear has the same lead on the left and right tooth surfaces, although a dual-lead worm gear has different leads on each side. This feature helps to eliminate play in the worm gear. However, it is important to note that a worm reducer gearbox can be manufactured with different tooth shapes for different applications.The worm gear is an alternative to conventional gears. It operates in a similar fashion to ordinary gear drives. The main advantage of a worm gear is that it is able to reduce the rotational speed and torque of a rotating shaft. It also has the added benefit of being able to transfer motion at an angle of 90 degrees. The only drawback of a worm gear is that it cannot reverse motion.

Applications

This market report analyzes the Worm reducer gearbox market from a global perspective. It includes a comprehensive analysis of the current market trends and future growth prospects. It also provides information about the competitive landscape and the main players in the industry. The report also highlights the key factors affecting the growth of the Worm reducer gearbox market.
The major regional markets for the Worm reducer gearbox include North America, Asia-Pacific, the Middle East and Africa, Latin America, and Europe. The market in these regions is likely to remain stable with a limited growth over the next few years. A worm gear is a small mechanical device that is connected to a larger gear. When connected together, it produces a low output speed but high torque.The gearing on a worm drive can be right-hand or left-hand, and can turn clockwise or counter-clockwise. Depending on the worm’s helix angles, back-driving and friction can be reduced. Worm gears are available in housed units or in gearsets. Some manufacturers offer integrated servomotors and multi-speed designs. High-accuracy and zero-backlash worms are available.Worm gears are particularly popular in instruments that require fast stops. They are also commonly found in elevators and lifts. Their soft nature and low-shock characteristics make them highly suitable for these types of machines.
worm reducer

Cost

Cost is an important consideration when selecting a worm reducer gearbox. The initial cost of a worm gear reducer gearbox is considerably lower than other types of gear reducer gearboxes. Worm gear reducer gearboxes are also more energy-efficient, and have higher overload capacities than competitive systems. The following are factors that affect the cost of a worm gear reducer gearbox.Stainless steel worm gear reducer gearboxes from Agknx offer great value for the money. They offer flange input and hollow output bore sizes, as well as center distances ranging from 1.75″ to 3.25″. In addition to the standard version, a stainless steel bushing kit is available, which allows users to use a wider range of head shaft sizes. Stainless steel worm gear reducer gearboxes are available in stock from all six of Agknx’s regional warehouses. They also come with free prepaid freight.Worm gear reducer gearboxes are often used in power transmission systems, elevators, conveyor belts, and medical equipment. In these applications, they are used to control the speed of a load and prevent it from freefall. While worm gear reducer gearboxes are not as efficient as helical gearboxes, they are still very useful for applications that require high torque or high output rates.To select the right type of worm for your application, you should consider the number of teeth it contains. It’s best to select worms with a combined total of 40 teeth or more.

aspect

Worm reducer gearboxes vary in size. They have one, two or more threads. Each thread has a lead angle. A high ratio has more teeth than a low gear, and a low ratio has fewer teeth. These differences are the result of gearing. The size of the worm gear reducer gearbox should be selected according to the specific application.The worm gear reducer gearbox saves space and provides more torque. Agknx Gearbox has created a variety of models to overcome common deceleration challenges, from standard to hygienic markets. The superior transmission Agknx range is designed to solve common deceleration challenges and expand to meet the needs of the sanitary industry.The diameter of the worm reducer gearbox is an important consideration. Its diameter should be equal to or slightly larger than the diameter of the grinding wheel or tool. This will affect the pressure angle. The pressure angle on a worm reducer gearbox depends on several factors, including its diameter and lead angle. The diameter of the grinding wheel or tool also has an effect on the profile of the worm.Worm gear reducer gearboxes are common. Many gear manufacturers have large stocks of these gear reducer gearboxes. Since gears are standardized, the mounting dimensions of worm gears are also common among manufacturers. This makes it easy to select a worm gear reducer gearbox for your application. In addition, the worm gear reducer gearbox is easy to install and maintain.
worm reducer

Worm gear reducer gearbox oil

Worm gear reducer gearboxes usually use gear oil. Several types of gear oils are available, including synthetic, polyalkylene glycol, and mineral oils. The oil used in the worm gear reducer gearbox must have the right viscosity for the gear. Some oils are more corrosive than others and should be avoided if the environment is toxic.The oil of the worm gear reducer gearbox must be protected against corrosion, wear and friction. It is best to choose a lubricant with low friction rate, high oxidation resistance and good anti-wear protection. While mineral oils are the most common type of lubricant, synthetic base oils can improve gear efficiency and reduce operating temperatures. This is because the Arrhenius rate rule states that the chemical reaction in the oil doubles for every 10 degrees Celsius increase in temperature.Worm gear reducer gearboxes are available in a variety of sizes and configurations. They are suitable for all kinds of machines and equipment. The sliding action between the worm gear and the output shaft produces high torque and high efficiency. If the transmission speed is low, the worm gear and output shaft can be combined for maximum efficiency.Worm gear reducer gearboxes require less frequent oil changes than other types of gear reducer gearboxes. However, regular oil should be changed every six months or 2,500 hours, whichever comes first. Also, it is a good idea to regularly monitor the oil level to prevent lubrication-related gearbox failures. It’s also wise to use synthetic oil, as it will last longer between oil changes.

China 151 RV30 Worm Reducer RV030 Worm Gearbox Speed Reducer NEMA23 for Stepper Motor     aluminum worm gearboxChina 151 RV30 Worm Reducer RV030 Worm Gearbox Speed Reducer NEMA23 for Stepper Motor     aluminum worm gearbox
editor by Cx 2023-04-27

China NEMA 17 42mm Stepper Motor Worm Planetary Gear Speed Reducer Gearbox Jk42HS48-1504A-634jsx32 combined worm gearbox

Solution Description

Products of unique ask for can be manufactured in accordance to the customer request !

Our Firm delivers 3 significant series of goods:Hybrid Stepper motors, Brushless Dc motor and Dc Brush motor.
We are usually carries on develop new type designs.If you require other kinds of areas, remember to never be reluctant to make contact with us.

 if you want much more data. remember to get in touch with with us, our make contact with info: 

 

HangZhou CZPT MOTOR CO.,LTD

Speak to Particular person: Ms Alice
 


/ Piece
|
1 Piece

(Min. Order)

###

Application: CNC Machine
Speed: Variable Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Driving
Number of Poles: 4

###

Customization:
Available

|



/ Piece
|
1 Piece

(Min. Order)

###

Application: CNC Machine
Speed: Variable Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Driving
Number of Poles: 4

###

Customization:
Available

|


Worm gear reducer gearbox

A worm gear reducer gearbox is a mechanical device used to reduce the viscosity of fluids. It can be used in a variety of applications and is available in a variety of sizes. Read on to learn more about these devices. They come in different shapes, sizes and prices. Also, these products are very reliable.
worm reducer

Viscosity

A new study shows that polymers derived from worms reduce the viscosity of aqueous solutions. The researchers mixed the worms with water and then applied shearing force to the mixture. Polymer-filled solutions are more resistant to shear forces than simple liquids. This is because when the solution is sheared, the filaments become entangled with each other. When the solution is sheared, the filaments line up, reducing the viscosity of the solution.
The researchers then used live insects to study the polymer’s shear thinning properties. By measuring “worm activity”, the researchers could calculate the viscosity of the mixture. The researchers then altered the worms’ activity and measured changes in the viscosity of the mixture.
The PSMA13 precursor was synthesized from BzMA at 90 °C. The resulting PSMA13-PBzMA65 worms were studied using SAXS, 1H NMR and TEM. They were found to be highly anisotropic over a wide temperature range.
The efficiency of a worm gear reducer gearbox increases with the number of revolutions of the input shaft. Braking torque also increases with the viscosity of the oil. These three factors are used to determine the efficiency of a worm gear reducer gearbox. A worm gear reducer gearbox with a helical pinion on the motor shaft will achieve a 40:1 gear ratio. The combination of a 4 liter ratio helical primary gear with a 10:l worm secondary gear will achieve high efficiency and overload capability.
The PSMA13-PBzMA65 dispersion has the same effective viscosity at 20 degrees Celsius and variable temperature. The transition time is 0.01 Pa s, indicating good thermal reversibility.

Self-locking function

Worm reducer gearboxes have many advantages. This gear has a high capacity and can transmit a lot of power. It’s also very quiet. Its advantages also include a space-saving design. Another benefit of worm reducer gearboxes is their ease of lubrication and cooling. It is also an excellent choice for transmitting high power with high gear ratios.
The self-locking function of the worm gear unit ensures that torque is only transmitted in one direction. When the load peaks, the torque signal is disabled. Unlike conventional gear reducer gearboxes, self-locking worm gears are not interchangeable.
Self-locking worm gears are not suitable for high mass applications because the weight of the driven mass can overwhelm the gear. The large mass can cause a huge side load on the worm, which can cause the worm to break. To solve this problem, a self-locking worm gear train with special provisions can be designed to reduce the heat generated.
The self-locking properties of worm reducer gearboxes are helpful in many industrial applications. It prevents reversing, which saves money on the braking system. It can also be used to lift and hold loads. The self-locking function is very useful in preventing backing.
The self-locking function depends on the pitch diameter and lead angle. A larger pitch diameter will make the self-locking function easier. However, the lead angle decreases as the pitch diameter increases. The higher pitch diameter will also make the worm reducer gearbox more resistant to backlash.
Self-locking worm gears are also useful in lifting and hoisting applications. If the worm gear is self-locking, it cannot reverse its direction without positive torque.s This makes the worm gear ideal for applications where the worm must be lowered.
worm reducer

application

The worm gear reducer gearbox market is a global industry consisting of several sub-sectors. This report analyzes past and current market trends and discusses key challenges and opportunities in this market. It also highlights leading marketing players and their marketing strategies. Furthermore, the report covers important segments and provides information on emerging segments.
Worm reducer gearboxes can be used in a variety of applications, such as reducing the speed and torque of rotating parts. These gears are usually available as gear sets and seat units and are available in multi-speed designs. Some manufacturers also offer precision worms and zero-backlash worms for high precision reduction.
Typically, worm gears are used on vertical axes that do not intersect. Compared to other gear drives, they are inefficient but produce a lot of reduction. There are two basic types of worm gears: double envelope and single envelope. The difference is in how they work. When the two axes do not intersect, a double-enveloping worm gear is used.
In the industrial world, worm gear reducer gearboxes are the most popular type of reducer gearbox. They are known for their high torque output multipliers and high reduction ratios. They are used in many power transmission applications including elevators, safety gates, and conveyor belts. They are especially suitable for low to medium-horsepower applications.
Worm gears can also be used for noise control. Its unique shape and size make it suitable for tight spaces. They are also suitable for conveying heavy materials and the packaging industry. In addition, they have high gear ratios, which make them suitable for small and compact machinery.

cost

The cost of a worm gear reducer gearbox depends on several factors, including the type of worm used, the materials used to manufacture the equipment, and the number of users. The worm gear reducer gearbox market is divided into two types: vertical and horizontal. Furthermore, the market is segmented by application, including the automotive industry, shipping industry, and machinery and equipment.
Worm gear reducer gearbox is a popular type of reducer gearbox. They are available in standard and flush-type packaging. They feature C-side inputs for standard NEMA motors and multiple mounting positions to suit the application. For example, a soup factory can use the same hollow reducer gearbox in multiple installation locations.
Another application for worm gear reducer gearboxes is in conveyors. They provide torque and speed reduction to move products efficiently. They are also widely used in security doors that automatically lock when they are closed. Typically, these doors use two separate worm drives. In this way, they cannot be reversed.
The cost of a worm gear reducer gearbox is determined by several factors. Size and material are important. Worm gear reducer gearboxes can be made of aluminum, cast iron, or stainless steel. Its efficiency depends on its size and proportions. It is usually used as a retarder in low-speed machinery, but can also be used as a secondary braking device.
There are two types of worms: standard worm and double worm gear. Standard worms have one or two threads, and double worm gears have one left-hand and right-hand thread. A single-threaded combination will give you a 50 reduction ratio, while a dual-threaded combination will only give you a 25% reduction.
worm reducer

manufacturing

Agknx Transmission Ltd. manufactures premium worm gear reducer gearboxes with robust construction and premium case-hardened steel worms. They use phosphor bronze centrifugally cast rims and attach them to the output shaft in the center. They also feature dual-purpose bearings and a large overhang load margin on the output shaft. The high-quality reducer gearbox also has a full range of positive lubrication functions. This means that they do not need special attention when using low-speed shaft extensions.
China NEMA 17 42mm Stepper Motor Worm Planetary Gear Speed Reducer Gearbox Jk42HS48-1504A-634jsx32     combined worm gearboxChina NEMA 17 42mm Stepper Motor Worm Planetary Gear Speed Reducer Gearbox Jk42HS48-1504A-634jsx32     combined worm gearbox
editor by CX 2023-03-27

China OEM NEMA 23, 0.9Degree, 1.8 Degree, 57mm size high torque gear reducer stepper motor wholesaler

Model Number: 56PA/57BYG
Phase: 2
Type: Hybrid
Current / Phase: 1-3A
Certification: ce, RoHS
Wire: 4 or 6 wires
Shaft: customized like D-cut, round or with hole
Customized service: sourcing connector, encoder, brake and so on
gearbox dia: 56mm
gearbox length: 47.5 to 71.5mm
Shaft diameter: 12mm
Packaging Details: B3B Corrugated Standard Export Carton or pallet packing
Port: HangZhou/ZheJiang /HangZhou

1 57mm size high torque gear reducer stepper motor Specification:

Company Information 1. Basic Information

HangZhou CZPT Co. Ltd is a manufacturer and exporter of various of motors with over 10 years experience.Our product ranges include:1) DC Brush Motor: 6-130mm diameter, 0.01-1000W output power2) DC Spur Gear Motor: 12-110mm diameter, 0.1-300W output power3) DC Planetary Gear Motor: 10-82mm diameter, 0.1-100W output power 4) Brushless DC Motor: 28-110mm, 5-1500W output power 5) Stepper Motor: NEMA 08 to NEMA 43, Can with gearbox and lead screw6) Servo Motor: 42mm to 130mm diameter, 50-4000w 7) AC Gear Motor: 49 to 100mm diameter, 6-140 output power

2. Manufacturing Plant

3. Certifications

Packaging & Shipping 1. Packing

2. Delivery

Payment Method

Customer Visits FAQ
Q: What’re your main products?A: We currently produce Brushed Dc Motors, 370 12v 2700rpm 9000rpm small dc motor for rotary tattoo machine Brushed Dc gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors and Ac Motors etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.Q: How to select a suitable motor?A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.Q: Do you have a customized service for your standard motors?A: Yes, we can customize per your request for the voltage, street legal shaft drive windshield predator epa certified dune buggy atv and utv speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.Q: Do you have an individual design service for motors?A: Yes, we would like to design motors individually for our customers, but it may need some CZPT charge and design charge.
Q: Can I have samples for testing first?A: Yes, definitely you can. After confirmed the needed motor specs, we will quote and provide a proforma invoice for samples, once we get the payment, we will get a PASS from our account department to proceed samples accordingly.Q: How do you make sure motor quality?A: We have our own inspection procedures: for incoming materials, we have signed sample and drawing to make sure qualified incoming materials; for the production process, we have tour inspection in the process and final inspection to make sure qualified products before shipping.Q: What’s your lead time?A: Generally speaking, our regular standard product will need 25-30days, Attractive design CZPT inner 3 speed shaft drive chainless 26 inch bicycle bmx mountain bike for men a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific ordersQ: What’s your payment term?A: For all our new customers, we will need a 40% deposit, 60% paid before shipment.Q: When will you reply after got my inquiries?A: We will respond within 24 hours once get your inquiries.Q: How can I trust you to make sure my money is safe?A: We are certified by the third party SGS and we have exported to over 85 countries up to June.2017. You can check our reputation with our current customers in your country (if our customers do not mind), or you can order via Alibaba to get trade assurance from Alibaba to make sure your money is safe.Q: What’s the minimum order quantity?A: Our minimum order quantity depends on different motor models, please email us to check. Also, we usually do not accept personal use of motor orders. Q: What’s your shipping method for motors?A: For samples and packages less than 100kg, we usually suggest express shipping; For heavy packages, we usually suggest air shipping or sea shipping. But it all depends on our customers’ needs.Q: What certifications do you have?A: We currently have CE and ROSH certifications.Q: Can you send me your price list?A: Since we have hundreds of different products, and price varies per different specifications, we are not CZPT to offer a price list. But we can quote within 24 hours once got your inquiries to make sure you can get the price in time.Q: Can I visit your company?A: Yes, welcome to visit our company, ZLYJ180 ZLY200 ZLYJ225 gearbox but please let us know at least 2 weeks in advance to help us make sure no other meetings during the day you visit us.

What Is a Gearbox?

A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.
gearbox

Gearboxes

Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.

Coaxial helical gearbox

The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.
gearbox

Epicyclic gearbox

An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.

Extruder helical gearing

The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.
gearbox

1 speed gearbox

CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.

China OEM NEMA 23, 0.9Degree, 1.8 Degree, 57mm size high torque gear reducer stepper motor  wholesaler China OEM NEMA 23, 0.9Degree, 1.8 Degree, 57mm size high torque gear reducer stepper motor  wholesaler

in Herat Afghanistan sales price shop near me near me shop factory supplier Gearbox Homemade Reverse Gearbox Harmonic Drive Gear Hollow Shaft Speed Reducer Precision Gearbox for Stepper Motor NEMA 34 manufacturer best Cost Custom Cheap wholesaler

  in Herat Afghanistan  sales   price   shop   near me   near me shop   factory   supplier Gearbox Homemade Reverse Gearbox Harmonic Drive Gear Hollow Shaft Speed Reducer Precision Gearbox for Stepper Motor NEMA 34 manufacturer   best   Cost   Custom   Cheap   wholesaler

We are searching ahead to building productive business associations with new clientele about the planet in the long term. Advanced thermo treatment method equipment, these kinds of as community heat treatment method oven, multi-use thermo remedy oven, and many others. We will supply best services and higher quality goods with all sincerity.

Substantial Performance BKM Series EPT Helical Hypoid Gear Models

Product Description

one. Push by hypoid EPT, has big ratios.

2. Big in output torque, large performance, vitality conserving and environmental protection.

3. Manufactured of substantial quality EPT alloy, ligEPT in weigEPT and non-rusting

4. Easy in working and reduced in sound, can work EPT in dreadful situations.

five. Good-seeking in physical appearance, durable in support existence and little in volume.

six. Suitable for all round installation, wide application and effortless of use.

seven. The Mounting Dimension of BKM collection are suitable with NMRV collection worm EPT device (A portion of NMRV050 dimensions are distinct from BKM050)

8. Modular and multi-structure can fulfill the requires of different conditions.

Sort BKM50,BKM63,BKM75,BKM90,BKM110
EPT Phase B: 2 phases
C: 3 levels
Ratio B: seven.five,10,12.five,15,20,25,30,40,fifty,sixty
C: fifty,60,seventy five,one hundred,125,a hundred and fifty,200,250,three hundred
Output torque Up to 500N.m
EPT EPT .12~five.5KW,with flange:B5 or B14
EPT content EPT alloy
Output shaft content: 40Cr
Hardness degree: 242-286HB
Helical EPT EPT:20CrMnTi
Hardness degree: 58-62HRC
EPT level:6 grade
EPT effectiveness B:92%-ninety four%
C:90%-ninety two%
Oil seal model SKF
EPT C ampU
Lubricant Mineral oil or artificial oil

Enter Speed: one thousand-1500rmp
Output Speed: 11-300rpm
Certification: ISO9001 CE
Ex EPT:.09-132KW
Guarantee: one Year from the date of shipping

Item Name Higher Performance BKM Series EPT Helical Hypoid Gear Units
The Equipment EPT 20CrMnTi
The scenario EPT Die-Solid EPT Alloy amp Grey Solid Iron
Shade Blue or Customized
HS Code 84834090
Design BKM050-BKM110
Shipping time 10-15days
Brand name EPT

Application:
Ceramic Sector Glass Industry Meals Market EPTlurgy Industry Beer amp Drink Business
EPT and dyeing Sector Textile Market Warehouse Logoistics Business EPT doing work EPTry
environmental protection products Market Leather Business Pharmacy Industry

Company information

EstabEPTd in 1985, EPT EPT EPTRY CO., LTD is a substantial and new EPT EPTrprise partaking in investigation, deveXiHu (West Lake) Dis.Hu (West Lake) Dis. and manufacture for EPT amp pace variator, 1 of the director member of EPT EPT Association of EPT EPT EPTry.
It covers more than forty,000 sq. meters, has much more than 400 personnel , twenty% of whom are experts, equipped with more than three hundred sets the most EPT accurate numerical management gear, incXiHu (West Lake) Dis.Hu (West Lake) Dis. German HOFLER forming EPT grinding EPT to boost good quality.
established up a lot more than 30 nationwide product sales branches to serve our buyers in time and completely.
Our products also exported to a lot more than thirty international locations main in Europe, Asia The usa, and Africa, with higher status.

EPT control

EPT ampDelivery

EPT Details: StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd carton/Pallet/StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd wood circumstance

Shipping and delivery Information : fifteen-30 functioning daEPTupon payment


Relevant Solution

EPT Planetary EPT Robot RV EPT speed EPT
Personalized made Non-stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd EPT UDL Sequence Variator
PYZ Collection Helical Tooth Shaft Mounted EPT 8000 Collection Cycloidal EPT
SLT Collection Spiral EPTl EPT SLSWL Series Worm Screw Jack
SLP Series Planetary EPT SLH/SLB Sequence High EPT EPT
NMRV Sequence Worm EPT BKM Series Helical-hypoid EPT
SLRC Sequence Helical EPT SLSMR Sequence Shaft Mounted EPT
SLXG Sequence Shaft Mounted EPT X/B Series Cycloidal EPT
SLR/SEPT/SLK/SLS Sequence Helical EPT AC/DC EPT

Principal merchandise listing: 16 collection incXiHu (West Lake) Dis.Hu (West Lake) Dis. SLR/SLS/SLK/SEPT sequence tough tooth flank EPT EPT , SLRC collection aluminium situation helical EPT EPTs,SLHSLB collection high EPT speed EPT, SLP collection planetary pace EPT, X/B collection cycloidal EPT, SLXG collection shaft-mounted EPT box, SLSWL sequence worm screw jack, SLT collection helical cone EPT box, entirely much more than ten,000 ratios, a variety of specification make us at the head of domestic EPT market, broadly serve the mechanical EPT discipline of ligEPT amp large industry these kinds of as: beer amp EPTrage, mining EPT, meals EPT, textile printing, rubber amp plastic materials, petrochemical market, jack-up transportation, pharmacy amp process hides, environmental security gear.


Certification

FAQ

one.Payment Phrase: TT, L/C

2.Shipping time: about thirty daEPTfrom EPT payment.

3.We take tailored items as per your EPT requirement.

four.XiHu (West Lake) Dis.hu (West Lake) Dis.strains for the Selection:Typically we can select one particular EPT which is ideal for you with some informations from you,this kind of as ratio/motor pace/mounting dimension/ out torque and so on.

five.If the bare minimum orEPTamount is in surplus of $ten thousand, there are preferential.

Q1: What information must I notify you to affirm the merchandise?

A:Design/Dimension, EPT Ratio, Shaft instructions amp OrEPTquantity.

Q2: What can i do if I never know which 1 EPT?

A:Dont fear, Send as significantly information as you can, our team will help you locate the rigEPT one you are seeking for.

Q3: What is your merchandise warranty period of time?

A:We offer you 1 yr warranty given that the vessel departure date remaining EPT.

This fall: Are you investing company or manufacturer ?

A: We are manufacturing facility.

Q5: How EPT is your supply time?

A: EPTly it is five-ten daEPTif the merchandise are in inventory. or it is fifteen-20 daEPTif the items are not in stock, it is according to amount.

Q6: Do you supply samples ? is it cost-free or extra ?

A: Indeed, we could offer you the sample for cost-free charge but do not pay the EPT of freight.

Q7: What is your terms of payment ?

A: Payment lt=1000USD, 100% EPT. Payment gt=1000USD, thirty% T/T EPT ,balance just before shippment.

If you have yet another question, pls really feel free to make contact with us as underneath:

Contact Us

  in Herat Afghanistan  sales   price   shop   near me   near me shop   factory   supplier Gearbox Homemade Reverse Gearbox Harmonic Drive Gear Hollow Shaft Speed Reducer Precision Gearbox for Stepper Motor NEMA 34 manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Herat Afghanistan  sales   price   shop   near me   near me shop   factory   supplier Gearbox Homemade Reverse Gearbox Harmonic Drive Gear Hollow Shaft Speed Reducer Precision Gearbox for Stepper Motor NEMA 34 manufacturer   best   Cost   Custom   Cheap   wholesaler

in Freetown Sierra Leone sales price shop near me near me shop factory supplier Elht Series High Precision Harmonic Robot Reducer Drive Strain Wave Gear Set for CNC Machine Sewing Machine Small Gear Speed Stepper Motor manufacturer best Cost Custom Cheap wholesaler

  in Freetown Sierra Leone  sales   price   shop   near me   near me shop   factory   supplier Elht Series High Precision Harmonic Robot Reducer Drive Strain Wave Gear Set for CNC Machine Sewing Machine Small Gear Speed Stepper Motor manufacturer   best   Cost   Custom   Cheap   wholesaler

We have exported our goods to Korea, Turkey, Bulgaria, Romania, Russia, Italy, Norway, the United states of america, Canada, etc. In 2000, EPG took the lead in attaining ISO14001 surroundings management certification and thereafter passed the inspection of clean creation and recycling financial system, profitable the title of “Zhejiang Environmentally friendly Company”. We are aiming to fulfill the calls for of the consumers close to the planet..


LEPT Collection

A mix merchandise that with big diameter hollow gap, flat condition, which is simple to operate.

LHN Series

LigEPT weigEPT item, 20% lighter than stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd goods.

LHG Collection

Large torque. Evaluate with stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd goods, LHG series’ torque capacity is thirty% increased. And the provider life is elevated by forty three%, with large load ability and large reliablity.

CONTAST US

LEPT/LHN Rated parameters

Design Reduction ratio Rated torque at 2000r/min enter Permissible EPT torque at start off and end Permissible maXiHu (West Lake) Dis.mum value for typical load torque Permissible maXiHu (West Lake) Dis.mum momentary torque Permissible maXiHu (West Lake) Dis.mum input rotational velocity Permissible average enter rotational velocity Backlash Layout life
Grease Grease
Nm kgfm Nm kgfm Nm kgfm Nm kgfm r/min r/min Arc Sec Hour
fourteen fifty 6.two .six twenty.7 two.1 seven.nine .seven forty.three 4.1 7000 3000 lt=thirty ten thousand
eighty 9 .nine 27 two.7 twelve.7 1.3 54.1 five.5
one hundred 9 .9 32 3.three 12.seven one.three sixty two.1 6.three
seventeen 50 18.4 one.9 39 4 29.9 3 80.5 8.two 6500 3000 lt=30 15000
eighty 25.three 2.6 forty nine.five five 31 3.2 one hundred.1 ten.two
a hundred 27.six 2.eight sixty two six.3 45 4.six 124.2 12.seven
20 fifty 28.eight 2.nine sixty four.four six.6 39 four 112.7 11.five 5600 3000 lt=thirty 15000
80 39.1 four 85 8.8 54 5.five 146.1 14.nine
100 forty six 4.seven ninety four.3 nine.6 fifty six five.8 169.1 17.two
120 forty six 4.seven a hundred 10.two fifty six 5.8 169.1 seventeen.two
one hundred sixty 46 4.7 100 ten.two 56 five.eight 169.1 seventeen.2
25 50 forty four.9 4.six 113 11.five 63 6.5 213.9 21.8 4800 3000 lt=thirty 15000
eighty 72.five 7.four 158 sixteen.1 100 10.two 293.3 29.9
one hundred 77.1 seven.nine 181 18.4 124 twelve.7 326.6 33.3
one hundred twenty seventy seven.1 seven.nine 192 19.six 124 12.seven 349.six 35.6
32 50 87.four 8.9 248 25.3 124 twelve.7 439 44.8 4000 3000 lt=30 15000
eighty a hundred thirty five.7 thirteen.eight 350 35.six 192 19.6 653 66.six
one hundred 157.six 16.1 383 39.one 248 25.3 744 seventy five.nine
forty a hundred 308 37.2 660 sixty seven 432 44 1232 126.7 4000 3000 lt=30 15000

LHG Rated parameters

Product Reduction ratio Rated torque at 2000r/min input Permissible EPT torque at commence and quit Permissible maXiHu (West Lake) Dis.mum price for regular load torque Permissible maXiHu (West Lake) Dis.mum momentary torque Permissible maXiHu (West Lake) Dis.mum input rotational velocity Permissible regular enter rotational velocity Backlash Design daily life
Grease Grease
Nm kgfm Nm kgfm Nm kgfm Nm kgfm r/min r/min Arc Sec Hour
14 fifty seven .seven 23 2.three nine .9 46 four.7 14000 8500 lt=20 15000
eighty 10 1 thirty three.1 fourteen one.four sixty one 6.2
one hundred ten 1 36 three.seven 14 one.four 70 seven.two
17 50 21 2.one 44 4.five 34 three.4 ninety one nine ten thousand 7300 lt=twenty 20000
80 29 two.9 56 five.seven 35 3.6 113 12
a hundred 31 3.two 70 7.two fifty one five.two 143 15
twenty 50 33 three.3 seventy three seven.four forty four 4.five 127 13 10000 6500 lt=20 20000
eighty forty four 4.5 96 nine.eight 61 6.2 a hundred sixty five 17
one hundred 52 five.three 107 10.9 sixty four six.five 191 twenty
a hundred and twenty 52 five.3 113 11.five 64 six.five 191 twenty
a hundred and sixty fifty two five.three one hundred twenty twelve.two 64 six.five 191 20
twenty five fifty fifty one five.two 127 13 72 7.three 242 25 7500 5600 lt=twenty 20000
80 82 eight.four 178 18 113 12 332 34
100 87 eight.nine 204 21 a hundred and forty 14 369 38
one hundred twenty 87 eight.9 217 22 140 fourteen 395 40
32 50 99 ten 281 29 one hundred forty fourteen 497 fifty one 7000 4800 lt=twenty 20000
eighty 153 sixteen 395 forty 217 22 738 seventy five
a hundred 178 eighteen 433 44 281 29 841 86
forty 100 345 35 738 75 484 forty nine 1400 143 5600 4000 lt=20 20000

  in Freetown Sierra Leone  sales   price   shop   near me   near me shop   factory   supplier Elht Series High Precision Harmonic Robot Reducer Drive Strain Wave Gear Set for CNC Machine Sewing Machine Small Gear Speed Stepper Motor manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Freetown Sierra Leone  sales   price   shop   near me   near me shop   factory   supplier Elht Series High Precision Harmonic Robot Reducer Drive Strain Wave Gear Set for CNC Machine Sewing Machine Small Gear Speed Stepper Motor manufacturer   best   Cost   Custom   Cheap   wholesaler