Product Description
Product Description
| Ratio | i | 32 | 40 | 48 | 50 | 56 | 64 | 80 |
| Nominal output torque | Nm | 13600 | 13600 | 12130 | 9000 | 11120 | 8950 | 9000 |
| Maximum output torque | Nm | 27200 | 27200 | 24260 | 18000 | 22240 | 17900 | 18000 |
CHINAMFG series: High efficiency, Low nosie
*Size,speed ratio and performance are recommended and customized
Core Feature
Structural feature
Reducer output planetary frame adopts integrated nut to eliminate axial clearance design, the front and back tapered roller bearing large span distribution and the whole box, forming a super integrated structure, to ensure the improvement of torsional rigidity and has a super strong radial bearing capacity and axial bearing capacity, using a processing process to complete, to ensure a very high coaxiality.
Gear ring of reducer adopts integral structure design.
Reducer gear ring, planetary frame, input shaft are made of 40Cr high-quality structural steel, hot forging process, so as to obtain higher material density, than the use of casting box, round steel, with higher strength, rigidity, toughness.
Gear characteristics
Real hard face spur gear, gear material is 20CrMnTi high quality alloy steel, after carburizing – grinding process processing, hardness up to HRC62, compared with ordinary steel 40Cr, 38CrMnTi surface nitriding treatment of gear has higher hardness, rigidity, toughness, wear resistance. The design and analysis technology of 3DSimulation is adopted to modify the tooth shape, tooth direction and follow the trimming, respectively, in order to reduce the noise of gear meshing and increase the service life of the gear train.
Application characteristics
Long span tapered roller bearing arrangement output integral planetary architecture, so that the product has strong radial bearing capacity and excellent axial bearing capacity, and has high rigidity. High precision applications, frequent start-stop and load changes are
Installation Instructions
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Electric Cars, Machinery, Agricultural Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Layout: | Coaxial |
| Gear Shape: | Cylindrical Gear |
| Step: | Single-Step |
| Customization: |
Available
| Customized Request |
|---|
Handling Backlash and Ensuring Precise Positioning in Servo Gearboxes
Servo gearboxes play a critical role in minimizing backlash and ensuring precise positioning in motion control systems:
1. Reduced Backlash Gearing: Many servo gearboxes utilize reduced backlash gearing technology. This involves designing gears with tighter tolerances and improved meshing profiles, resulting in minimal play between gear teeth. This reduces or eliminates backlash, which is essential for accurate motion control.
2. Preloading: Some servo gearboxes employ preloading mechanisms to remove any gaps between gears. By applying a controlled axial load to the gears, the meshing teeth remain in constant contact, eliminating backlash and enhancing precision.
3. Stiffness and Rigidity: Servo gearboxes are designed to be stiff and rigid, which helps minimize elastic deformation under load. This stiffness prevents gear teeth from deflecting, reducing the potential for backlash and maintaining accurate positioning.
4. High Gear Meshing Quality: The manufacturing process of servo gearboxes focuses on producing high-quality gears with precise tooth profiles and minimal manufacturing variations. This ensures consistent and smooth gear meshing, minimizing the likelihood of backlash.
5. Closed-Loop Control: Combining servo gearboxes with closed-loop control systems allows for real-time feedback on position and speed. Any deviation from the desired position can be quickly corrected by adjusting the motor’s output, compensating for any inherent backlash and ensuring precise positioning.
6. Advanced Gear Coatings: Some servo gearboxes incorporate advanced gear coatings or treatments that improve the meshing characteristics and reduce friction. This contributes to smoother gear engagement and minimizes backlash effects.
7. Inertia Matching: Properly matching the inertia of the load to the servo motor and gearbox combination reduces the likelihood of overshooting or oscillations during positioning. Accurate inertia matching enhances the control system’s ability to maintain precise positioning.
Servo gearboxes’ ability to handle backlash and ensure precise positioning is crucial for applications that require high accuracy, such as robotics, CNC machines, and automated manufacturing processes. By employing advanced design techniques and technologies, servo gearboxes contribute to achieving repeatable and accurate motion control.
Contribution of Servo Gearboxes to Energy Efficiency in Automated Systems
Servo gearboxes play a crucial role in enhancing energy efficiency in various automated systems by addressing several key aspects:
1. Precise Control: Servo gearboxes enable precise and accurate control over motion, allowing automated systems to perform tasks with minimal wastage of energy. Precise positioning reduces the need for unnecessary movements and adjustments.
2. Variable Speed Operation: Servo gearboxes offer the flexibility to operate at different speeds based on the application’s requirements. This capability ensures that the system uses only the necessary amount of energy for a given task, avoiding excessive power consumption.
3. Reduced Inertia: Servo gearboxes are designed to minimize inertia, which is the resistance to changes in motion. Lower inertia results in quicker response times and less energy required to accelerate or decelerate moving parts.
4. Regenerative Braking: Some servo systems are equipped with regenerative braking mechanisms. During deceleration or braking, energy generated is fed back into the system or stored for later use, reducing energy wastage.
5. Dynamic Load Management: Servo gearboxes can adapt to varying load conditions in real-time. They adjust torque and speed based on the load, optimizing energy usage and preventing overconsumption of power.
6. Reduced Heat Generation: Efficient servo gearboxes produce less heat during operation, leading to lower energy losses. This reduction in heat generation contributes to overall energy efficiency and extends the lifespan of components.
7. Smart Control Algorithms: Modern servo systems incorporate intelligent control algorithms that optimize the use of energy. These algorithms manage power distribution, minimize idle time, and synchronize movements for optimal efficiency.
8. Energy Recovery: In certain applications, servo gearboxes can capture and reuse energy that would otherwise be dissipated as heat. This energy recovery further contributes to the overall energy efficiency of the system.
9. Low Friction Designs: Servo gearboxes often incorporate low-friction components and efficient lubrication systems to minimize energy losses due to friction.
10. Matched Components: Properly matched servo gearbox and motor combinations ensure that the system operates at its peak efficiency point, minimizing energy consumption.
By incorporating these energy-saving features and capabilities, servo gearboxes enhance the energy efficiency of automated systems, making them more environmentally friendly and cost-effective over the long term.
Benefits of Using a Servo Gearbox for Precise Motion Control
Servo gearboxes offer several advantages when it comes to achieving precise motion control in various applications:
1. Accuracy: Servo gearboxes provide exceptional accuracy in speed and position control, making them suitable for applications that require tight tolerances and precise movements.
2. Low Backlash: These gearboxes are designed to minimize backlash, which is essential for eliminating lost motion and ensuring accurate positioning.
3. High Torque Density: Servo gearboxes offer a high torque-to-size ratio, allowing them to handle significant loads while maintaining a compact footprint.
4. Dynamic Performance: They excel in dynamic performance, enabling rapid changes in speed and direction with minimal overshoot or settling time.
5. Responsiveness: Servo gearboxes respond quickly to control signals, making them ideal for applications that require rapid adjustments and changes in direction.
6. Smooth Operation: These gearboxes provide smooth and precise movement, critical for applications like robotics, where jerky or uneven motion can lead to inaccuracies or damage.
7. Reduces Maintenance: The accuracy and durability of servo gearboxes can reduce wear and tear on other components, leading to lower maintenance requirements.
8. Improved Efficiency: Servo gearboxes offer high efficiency in power transmission, contributing to energy savings and minimizing heat generation.
9. Customization: They can be tailored to specific application needs, including factors like reduction ratios, mounting options, and feedback compatibility.
10. Versatility: Servo gearboxes find application in various industries, including robotics, CNC machining, medical equipment, and automation.
Overall, the benefits of using a servo gearbox for precise motion control make them an essential component in applications that demand accuracy, responsiveness, and reliable performance.
editor by CX 2024-05-16
China factory Planetary Gearbox Gear Box Reduction Gearbox Speed Reducer Epicyclic Motor Transmission Machine Housing Best Price Unit Servo Hydraulic Planetary Gearboxes gearbox engine
Product Description
Planetary Gearbox gear box reduction gearbox speed reducer epicyclic motor transmission machine housing best price unit servo hydraulic Planetary Gearboxes
Product Description
We are a state-of-the-art manufacturing facility dedicated to the production of high-quality gearboxes, an essential element in power transmission and motion control across a wide array of industries. Our core expertise lies in crafting precision-engineered gearboxes that excel in reliability, efficiency, and durability.
Our gearbox offerings include a diverse range of designs from worm gears to planetary gears, helical gears, and spur gears, catering to various torque and speed requirements. Each gearbox is meticulously manufactured using premium materials such as alloy steels, cast iron, or specialized composites, ensuring optimal strength and resistance to wear and tear under heavy loads and challenging environments.
The design process at our factory adheres strictly to international standards and utilizes cutting-edge technology for precision machining and heat treatment processes. This guarantees exceptional dimensional accuracy, smooth operation, and low noise levels in all our gearboxes.
Furthermore, we understand the importance of customization in meeting unique industrial demands. Hence, we also provide bespoke solutions tailored to specific customer needs, ranging from customized ratios to specialized mounting arrangements and compatibility with various motor types.
In essence, by partnering with us for your gearbox requirements, you can expect not only top-notch products but also unparalleled technical support, competitive pricing, and on-time delivery. We take pride in being a one-stop destination for all your gearbox needs, providing a seamless integration into any application and delivering superior performance throughout the product lifecycle.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Three-Step |
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Lubrication Practices for Maintaining Servo Gearbox Performance
Proper lubrication is essential for maintaining the performance and longevity of servo gearboxes:
1. High-Quality Lubricants: Selecting the right lubricant is crucial. High-quality lubricants with the appropriate viscosity and additives are chosen based on factors like load, speed, and operating conditions.
2. Lubricant Compatibility: Ensure that the chosen lubricant is compatible with the materials used in the gearbox construction, including seals, bearings, and gears.
3. Regular Lubrication Checks: Regularly inspect the lubricant level and condition. Monitor for signs of contamination, degradation, or overheating.
4. Proper Lubricant Amount: Avoid overfilling or underfilling the gearbox. Follow manufacturer guidelines for the correct lubricant amount to ensure optimal performance.
5. Scheduled Lubrication Intervals: Establish a maintenance schedule for lubricant replacement based on operating hours, usage intensity, and environmental conditions.
6. Lubricant Contamination Prevention: Keep the gearbox environment clean and free from contaminants like dust, dirt, and moisture to prevent lubricant contamination.
7. Lubricant Temperature: Monitor and control the operating temperature of the gearbox to prevent lubricant breakdown and ensure proper viscosity.
8. Re-Greasing: In some cases, re-greasing may be necessary due to lubricant aging or displacement. Follow manufacturer recommendations for re-greasing intervals.
9. Seal Inspection: Check the seals regularly for wear and damage. Damaged seals can lead to lubricant leakage and contamination.
10. Expert Consultation: If unsure about lubricant selection or maintenance procedures, consult with experts or follow manufacturer recommendations.
Proper lubrication practices play a critical role in minimizing friction, reducing wear, and ensuring the efficient operation of servo gearboxes in motion control systems.
Contribution of Servo Gearboxes to Energy Efficiency in Automated Systems
Servo gearboxes play a crucial role in enhancing energy efficiency in various automated systems by addressing several key aspects:
1. Precise Control: Servo gearboxes enable precise and accurate control over motion, allowing automated systems to perform tasks with minimal wastage of energy. Precise positioning reduces the need for unnecessary movements and adjustments.
2. Variable Speed Operation: Servo gearboxes offer the flexibility to operate at different speeds based on the application’s requirements. This capability ensures that the system uses only the necessary amount of energy for a given task, avoiding excessive power consumption.
3. Reduced Inertia: Servo gearboxes are designed to minimize inertia, which is the resistance to changes in motion. Lower inertia results in quicker response times and less energy required to accelerate or decelerate moving parts.
4. Regenerative Braking: Some servo systems are equipped with regenerative braking mechanisms. During deceleration or braking, energy generated is fed back into the system or stored for later use, reducing energy wastage.
5. Dynamic Load Management: Servo gearboxes can adapt to varying load conditions in real-time. They adjust torque and speed based on the load, optimizing energy usage and preventing overconsumption of power.
6. Reduced Heat Generation: Efficient servo gearboxes produce less heat during operation, leading to lower energy losses. This reduction in heat generation contributes to overall energy efficiency and extends the lifespan of components.
7. Smart Control Algorithms: Modern servo systems incorporate intelligent control algorithms that optimize the use of energy. These algorithms manage power distribution, minimize idle time, and synchronize movements for optimal efficiency.
8. Energy Recovery: In certain applications, servo gearboxes can capture and reuse energy that would otherwise be dissipated as heat. This energy recovery further contributes to the overall energy efficiency of the system.
9. Low Friction Designs: Servo gearboxes often incorporate low-friction components and efficient lubrication systems to minimize energy losses due to friction.
10. Matched Components: Properly matched servo gearbox and motor combinations ensure that the system operates at its peak efficiency point, minimizing energy consumption.
By incorporating these energy-saving features and capabilities, servo gearboxes enhance the energy efficiency of automated systems, making them more environmentally friendly and cost-effective over the long term.
Contribution to High Accuracy and Repeatability
Servo gearboxes play a crucial role in achieving high accuracy and repeatability in motion control systems:
Precise Positioning: Servo gearboxes are designed to deliver precise angular displacement, allowing machines to accurately reach specific positions and orientations. This accuracy is vital in applications like robotic arms, CNC machines, and medical devices.
Low Backlash: Servo gearboxes are engineered to minimize backlash, which is the amount of play or lost motion between gear teeth. Low backlash ensures that any change in input direction is immediately translated into an accurate output movement, reducing errors and deviations.
High Torque Transmission: Servo gearboxes are capable of transmitting high torque with minimal energy loss. This enables precise control of rotational forces, ensuring that the output movement corresponds precisely to the input command.
Dynamic Response: Servo gearboxes exhibit rapid and accurate response to input signals. This responsiveness is crucial for applications requiring quick changes in motion, such as industrial robots, where rapid and precise movement is necessary for tasks like pick-and-place operations.
Feedback Systems: Servo systems often incorporate feedback devices like encoders and resolvers. These devices provide real-time information about the actual position, speed, and direction of the output shaft. The feedback data allows the servo controller to make continuous adjustments, resulting in accurate positioning and motion control.
Closed-Loop Control: Many servo systems operate in a closed-loop control configuration. In this setup, the controller continuously compares the desired position with the actual position using feedback data and makes corrections as needed. This closed-loop approach ensures that any errors or disturbances are quickly corrected, maintaining accuracy over time.
High-Resolution Encoders: Servo gearboxes often use high-resolution encoders that provide fine position feedback, enabling precise control of movements down to fractions of a degree. This level of resolution contributes to high accuracy in positioning.
Overall, servo gearboxes contribute to achieving high accuracy and repeatability by combining precision design, low backlash, responsive control, and feedback mechanisms. These characteristics make them essential components in applications where precise and repeatable motion is required.
editor by CX 2024-04-23
China Hydraulic Power Transmission Planetary Construction Hoist Gearbox wholesaler
Solution Description
Item Description
planetary pace reducer.
We have tqh08-eighteen collection,the12-30 collection,hs70,hs160,hs200,hs380,hs450,hs600 sequence.
TQH08-18 Collection
| max.output torque N.m | equipment ratio | brake torque N.m | hydraulic motor | bodyweight KG |
| 2500 | seventy three.a hundred twenty five | a hundred ninety | ZM40 | one hundred and five |
Modular layout realizes variable combination.
Housing is made of forged iron, which improve it’s rigidity and anti-vibration
Solar and planet gears are processed by cementite and hardening gears are processed by grinding, which boost the efficiency and life time of equipment units.
Input manner: coaxial enter, helical gear input, bevel- helical gear enter
Output manner: internal involute spline, hollow shaft with shrink disk, exterior involute spline, CZPT shaft with flat important
Mounting method: horizontal vertical, torque-arm
WP collection sizes 9~34, transmission stage:2,3, ratio:25~4000, ratio will be larger in mixture with WR, WK series.
Comprehensive Photographs
Product Parameters
| max output torque N.M | Max one wire rope pulling drive N | gear ratio | brake torque N.m | hydraulic motor | input rotation velocity Rpm | excess weight(kgs) |
| 3136 | 14500 | 21.5 | a hundred ninety | A2F56W6.1Z2 | 3200 | 160 |
| 5186 | 30000 | 30.3 | 296 | A2F63W2Z2 | 3200 | a hundred and sixty |
| 11500 | 50000 | 37.six | 460 | a2f80w2z | 3200 | 115 |
| 18000 | 90900 | 26.4/36.eight | 507 | a2fe55/sixty three-vzl | 3200 | one hundred sixty five |
| 26000 | 118000 | sixty seven/78.8 | 710 | a2fe55/61w-vzl | 3200 | one hundred fifty five |
| 27000 | 120000 | 35.forty six/forty one | 790 | a2fe107/61w-vzl | 3200 | 115 |
| 10000 | 208000 | 128.6/147 | 1133 | a2fe16/61w-vzl | 3200 | 440 |
workshopplanetary winch velocity reducer packing
shipping and delivery to HangZhou portother planetary winch gearbox we makecertificates
|
/ Piece | |
3 Pieces (Min. Order) |
###
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Layout: | Coaxial |
| Gear Shape: | Cylindrical Gear |
| Step: | Stepless |
###
| Samples: |
US$ 2000/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
|---|
###
| max.output torque N.m | gear ratio | brake torque N.m | hydraulic motor | weight KG |
| 2500 | 73.125 | 190 | ZM40 | 105 |
###
| max output torque N.M | Max single wire rope pulling force N | gear ratio | brake torque N.m | hydraulic motor | input rotation speed Rpm | weight(kgs) |
| 3136 | 14500 | 21.5 | 190 | A2F56W6.1Z2 | 3200 | 160 |
| 5186 | 30000 | 30.3 | 296 | A2F63W2Z2 | 3200 | 160 |
| 11500 | 50000 | 37.6 | 460 | a2f80w2z | 3200 | 115 |
| 18000 | 90900 | 26.4/36.8 | 507 | a2fe55/63-vzl | 3200 | 165 |
| 26000 | 118000 | 67/78.8 | 710 | a2fe55/61w-vzl | 3200 | 155 |
| 27000 | 120000 | 35.46/41 | 790 | a2fe107/61w-vzl | 3200 | 115 |
| 10000 | 208000 | 128.6/147 | 1133 | a2fe16/61w-vzl | 3200 | 440 |
|
/ Piece | |
3 Pieces (Min. Order) |
###
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Layout: | Coaxial |
| Gear Shape: | Cylindrical Gear |
| Step: | Stepless |
###
| Samples: |
US$ 2000/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
|---|
###
| max.output torque N.m | gear ratio | brake torque N.m | hydraulic motor | weight KG |
| 2500 | 73.125 | 190 | ZM40 | 105 |
###
| max output torque N.M | Max single wire rope pulling force N | gear ratio | brake torque N.m | hydraulic motor | input rotation speed Rpm | weight(kgs) |
| 3136 | 14500 | 21.5 | 190 | A2F56W6.1Z2 | 3200 | 160 |
| 5186 | 30000 | 30.3 | 296 | A2F63W2Z2 | 3200 | 160 |
| 11500 | 50000 | 37.6 | 460 | a2f80w2z | 3200 | 115 |
| 18000 | 90900 | 26.4/36.8 | 507 | a2fe55/63-vzl | 3200 | 165 |
| 26000 | 118000 | 67/78.8 | 710 | a2fe55/61w-vzl | 3200 | 155 |
| 27000 | 120000 | 35.46/41 | 790 | a2fe107/61w-vzl | 3200 | 115 |
| 10000 | 208000 | 128.6/147 | 1133 | a2fe16/61w-vzl | 3200 | 440 |
What is a worm gear reducer gearbox?
A worm gear reducer gearbox is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer gearbox can increase the output torque of the engine according to the gear ratio. This type of gear reducer gearbox is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.
Hollow shaft worm gear reducer gearbox
The hollow shaft worm gear reducer gearbox is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducer gearboxes are usually used in combination with helical gear reducer gearboxes. The latter is mounted on the input side of the worm gear reducer gearbox and is a great way to reduce the speed of high output motors. The gear reducer gearbox has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer gearbox. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducer gearboxes can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer gearbox, be sure to choose the correct one according to your requirements.
Double throat worm gear
Worm gear reducer gearboxes use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.
Self-locking function
One of the most prominent features of a worm reducer gearbox is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer gearbox can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducer gearboxes. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer gearbox is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer gearbox is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer gearbox is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer gearbox is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.
Heat generated by worm gears
Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.
Size of worm gear reducer gearbox
Worm gear reducer gearboxes can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer gearbox has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducer gearboxes great for space-saving applications. They also have low initial costs.
Worm gear reducer gearboxes are one of the most popular types of speed reducer gearboxes. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer gearbox depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.
editor by CX 2023-04-14
China Good quality Durable Construction Machinery Device EX300-5 Travel Hydraulic Motor Reduction Gearbox Excavator Final Drive near me factory
Condition: New
Applicable Industries: Building Material Shops, Machinery Repair Shops, Manufacturing Plant, Construction works , Energy & Mining
Showroom Location: None
Video outgoing-inspection: Provided
Machinery Test Report: Provided
Marketing Type: New Product 2571
Warranty: 3 months
Product name: Travel Reducer
Application: Crawler Excavator
Material: Alloy Steel
After Warranty Service: Online support
Local Service Location: None
After-sales Service Provided: Online support
Port: HangZhou
Specification
Products Name
Travel Motor
Model
EX300-5
Condition
100% new
Application
Crawler Excavator
Material
Alloy Steel
Type
Hydraulic
Products Description Related Products Why Choose Us FAQ Q.How can I do if there is something wrong with the items?A.Firstly, pls provide JMLISHEN 24V60W10-60RPM DC Worm Gear Motor, Garage Door Motor, Robot Motor Billboard Lift Motor pictures for us and we will check. After confirmed send the wrong parts, it keep for you, and we High Precision Planetary Reducer Stepper Motor Flange Output Rate 5~1001 Gearbox Planetary Reducer will offer the correct item or add in next order.Q.How can I pay the order?A.Through 100%T/T, Western Union, Alibaba Double pitch conveyor chain C2042 trade assurance.Q.When will get the products after I place order?A.If all parts we have, we will arrange the goods within 24hours; If no stock, before order we will be confirm delivery time with you.Q.When can we get the reply?A.Any inquiries will be replied within 24 hours.Q.Is your factory accept customization?A.We could be accept stardard or non-standard parts depends on quality.For more information, please click here to contact us
Types of Vehicle Gearboxes
In a vehicle, there are many types of gearboxes available. There are planetary gearboxes, Coaxial helical gearboxes, and skew bevel helical gearboxes, among others. In this article, we’ll cover all of them and help you determine which type of gearbox would be right for your vehicle. Also, we’ll discuss how each differs from the others.
planetary gearbox
A planetary gearbox is composed of three main components: a sun gear, an input bevel gear, and an output shaft. A planetary gearbox can have different output torques and ratios. The basic model of a planetary gearbox is highly efficient and transmits 97% of the power input. There are several kinds of planetary gearboxes, depending on the type of operation. In general, there are three types: the simple, the intermediate, and the complex.
The price of a planetary gearbox can vary a lot, and it’s important to know what you’ll need. Different manufacturers produce different planetary gearboxes, so check with a manufacturer to see what they have available. Make sure to check the quality of the planetary gearbox before making a final purchase. In addition, be sure to compare the prices and the availability of a particular product. A quality planetary gearbox will provide years of trouble-free operation and will not break your bank.
Planetary gears feature an integer number of teeth. Each planet has teeth that must mesh with its ring or sun. The number of planets, ring, and tooth count of each gear determine whether the teeth mesh. Some planets have fewer teeth than others, so they mesh better than others. However, compound planets can be more flexible and achieve higher reduction ratios. If you’re looking for a planetary gearbox for your next project, consider getting in touch with a manufacturer who specializes in this technology.
When it comes to construction, a planetary gearbox is no exception. It’s extremely important to choose the right planetary gear for your application, because an imbalance in the planet gear can cause increased wear and failure. Moreover, the compact size of a planetary gear ensures maximum heat dissipation. However, a planetary gear box may require cooling in some applications. A planetary gearbox will make your life easier, and it will give you years of trouble-free operation.
Straight bevel helical gearbox
The Straight bevel helical gearbox has a number of advantages, but it has a relatively short manufacturing process. Its most popular application is in the automotive industry, where it is used in many types of vehicles. Other applications include heavy and light equipment and the aviation and marine industries. Below is a brief introduction to this gearbox type. Read on to learn about its benefits. This type of gearbox is one of the easiest to manufacture.
The spiral bevel gear has larger teeth than straight bevel gears, resulting in a smoother, quieter rotation. It can handle high-speed heavy loads with less vibration. Spiral bevel gears are classified by their tooth form and cutting method. Straight bevel gears are easier to design and manufacture, but spiral bevel gears are more expensive. Both designs are suitable for high-speed, heavy-load operations, and general manufacturing applications.
In addition to being easy to install, the modular bevel gears have many advantages. They have an exceptionally high degree of interchangeability and feature the highest standards of component integrity. They can also be tailored to meet your specific requirements. The advantages of this gearbox type include high precision, optimum performance, and low noise. And because they are modular, they can be produced in a variety of finishes. These include stainless steel, titanium, and bronze.
Straight bevel helical gearbox manufacturers are committed to a high degree of precision in their designs. The radii, torques, and tooth profiles of straight bevel gears are more precisely measured than those of cylindrical bevel gears. The same calculations are used for all traditional bevel gear generators. This ensures that your 5-axis milled bevel gear sets have the same calculations and layout.
Coaxial helical gearbox
The Coaxial helical gearbox is a highly efficient transmission system that is well suited for light-duty applications. Compared to spur-type gearboxes, the real pitch of a Coaxial helical gearbox is low at all helix angles. This is because the coaxial type has the same number of teeth and center gap as the spur gearbox. Coaxial helical gearboxes also have a smaller footprint and are compact.
Several nations have implemented lockdown regulations for Industrial Gearbox trade, threatening the global economy. Several factors have been implicated in COVID-19, including supply chain, market, and financial markets. Experts are monitoring the situation globally and project remunerative prospects for gearbox manufacturers after the crisis. This report depicts the latest scenario and offers a comprehensive analysis of COVID-19’s impact on the entire industry.
This Coaxial helical gearbox features a compact structure and high precision gear. Its three-stage design combines two-stage gears with a single-stage gear, forging high-quality alloy steel for high precision and durability. The gears are serially-designed for easy interchangeability. They are also available in high-frequency heat-treated steel. A Coaxial helical gearbox is the perfect solution for many applications.
Coaxial helical gearboxes have the added benefit of using cylindrical gears instead of shafts. They operate quietly, and have more surface area to interact with. Their fixed angles make them suitable for heavy-duty applications, like in conveyors, coolers, and grinders. Compared to other gearbox types, Helical gearboxes have higher power-carrying capacity. Listed below are the benefits of a Coaxial Helical Gearbox
Skew bevel helical gearbox
A Skew bevel helical gear box is a common type of industrial gearbox. These gearboxes are rigid and compact and can be used in a variety of applications. They are commonly used in heavy-duty applications such as grinding mills, conveyors, and coolers. They are used in many applications to provide rotary motions between non-parallel shafts. They also have the added benefit of high-efficiency in a variety of industries.
Skew bevel helical gear boxes are suitable for heavy loads and are monolithic in construction. This type of gearbox combines the benefits of bevel and helical gears for right-angle torque, which makes it a popular choice for heavy-duty applications. In addition to being a robust and reliable gearbox, these gearboxes are highly customizable and can meet almost any industrial need.
To maximize the efficiency of bevel gears, FE-based tooth contact analysis is used to develop a sophisticated geometry optimization algorithm. The software also allows users to define optimal flank topography by introducing application-specific weightings for specific load levels. With this data, a manufacturing simulation is conducted to determine the best variant. A robust variant combines the benefits of efficiency, load-carrying capacity, and low excitation behavior.
The helical gear can be angled at 90 degrees. This is similar to a spur gear but produces less noise. It can achieve a nine-to-one speed reduction with one stage. However, a helical gear requires a larger driver gear for higher reductions. This gearbox is suitable for speeds from 1:1 to three times. They are often used in the manufacture of motors and generators.
Extruder helical gearbox
An extruder helical gearbox is one of the most common industrial gears. It is compact in size and low-power consuming, making it ideal for heavy-duty applications. Extruder helical gearboxes are suitable for a variety of industrial applications, including cement, plastics, rubber, conveyors, and coolers. In addition to its use in plastics and rubber manufacturing, this gearbox is also useful in other low-power applications such as crushers, coolers, and conveyors.
CZPT SG series Extruder Helical Gearboxes are available in Single Screw and Twin Screw Variations. These gears feature a compact design, high power density, and long service life. Axial bearing housing and thrust bearings are mounted on the input shafts. Extruder helical gearboxes can be installed in various positions, including horizontal, vertical, and inclined.
Helicoidal gears are often produced in a modular manner. This design provides multiple benefits, including engineering and performance advantages, modular production, and the highest level of component integrity. A single helical gearbox can be assembled into a larger gearbox if needed, but modular production ensures consistent performance and economy. This modular design is also cost-effective. It is a versatile and reliable solution for a wide range of applications.
In addition to its efficiencies, Extruder helical gearboxes also have a low noise profile. They have no squeal sounds, and they are silent when running. They can transfer more power than conventional gearboxes. This type of gear has been used in the manufacturing of high-quality plastic products for years. They are often used for applications in automotive transmissions. Aside from being quiet, helical gears have higher contact levels and lower vibration.
in Jaipur India sales price shop near me near me shop factory supplier Hydraulic Transmission Planetary Gearbox Slewing Speed Reducer manufacturer best Cost Custom Cheap wholesaler
Because of to our vast solution variety and wealthy encounters in this business, our items are offering well in the American, European, South American and Asian marketplaces. If you require any info or samples, make sure you speak to us and you will have our shortly reply. planetary slewing pace EPTT.
We have tqh08-18 sequence,the12-thirty collection,hs70,hs160,hs200,hs380,hs450,hs600 collection.
TQH08-18 Collection
| max.output torque N.m | EPTT ratio | brake torque N.m | EPTT motor | weigEPTT KG |
| 2500 | 73.one hundred twenty five | one hundred ninety | ZM40 | one zero five |
Modular design and style realizes variable blend.
#9830EPTT is produced of solid iron, which boost it truly is rigidity and anti-vibration
#9830EPTT and planet EPTTs are processed by cementite and hardening EPTTs are processed by grinding, which boost the efficiency and lifetime of EPTT models.
#9830Input method: coaXiHu (West Lake) Dis.al enter, helical EPTT input, EPTTl- helical EPTT enter
#9830Output mode: internal involute spline, hollow shaft with shrink disk, external involute spline, reliable shaft with flat important
#9830Mounting manner: horizontal vertical, torque-arm
#9830WP sequence dimensions nine~34, EPTT phase:two,3, ratio:twenty five~4000, ratio will be greater in blend with WR, WK series.
in Vienna Austria sales price shop near me near me shop factory supplier Planetary Winch Drive Slew Gear Housing Reducer Gearbox Small Wind Turbine Hollow Shaft High Torque Motors Beve 2 Speed Multi Stage Inline Epicyclic Hydraulic manufacturer best Cost Custom Cheap wholesaler
Good quality and credit rating are the bases that make a company alive. EPG has been productively licensed by ISO9002 Good quality Administration System, ISO9001 Quality Management Method, API certificate, ISO/TS16949:2002 and ISO10012 measurement management technique. With many years’ knowledge in these strains, we have been distinguished from other suppliers in China by our positive aspects in aggressive pricing, on-time supply, prompt responses, on-hand engineering help and great soon after-income solutions.
planetary winch Travel Slew Gear housing EPTT EPTT tiny wind turbine hollow shaft large torque motors EPTT two velocity multi stage inline epicyclic EPTT
in Bloemfontein South Africa sales price shop near me near me shop factory supplier Gearbox for Winchzq 350 Gearbox Winch Gearbox Offroad Gearbox Winch Gasoline 186f Tiller Gearbox Hydraulic Pump′s Gearbox manufacturer best Cost Custom Cheap wholesaler
EPG will always adhere to it company spirit of becoming functional, revolutionary, efficient and excellent to make the leading intercontinental transmission travel. In 2008, it was awarded with “National Export Commodity Inspection-free Company”. The solution properly displays environmental protection and power saving.
EPT for winchzq 350 EPT winch EPT offroad EPT winch gasoline 186f tiller EPT EPT pump’s EPT
Business details
EstabEPTd in 1985, EPT EPT EPTRY CO., LTD is a higher and new EPT EPTrprise participating in research, deveXiHu (West Lake) Dis.Hu (West Lake) Dis. and manufacture for EPT amp velocity variator, one particular of the director member of EPT EPT Affiliation of EPT EPT EPTry.
It handles more than forty,000 sq. meters, has far more than four hundred personnel , 20% of whom are experts, equipped with much more than three hundred sets the most EPT precise numerical management tools, incXiHu (West Lake) Dis.Hu (West Lake) Dis. German HOFLER forming EPT grinding EPT to enhance quality.
established up a lot more than thirty nationwide product sales branches to provide our buyers in time and thoroughly.
Our merchandise also exported to far more than 30 countries main in Europe, Asia The united states, and Africa, with substantial reputation.
EPT management
EPT
Relevant EPT varieties
| EPT Planetary EPT | Robotic RV EPT pace EPT |
| Personalized created Non-stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd EPT | UDL Sequence Variator |
| PYZ Collection Helical Tooth Shaft Mounted EPT | 8000 Series Cycloidal EPT |
| SLT Sequence Spiral EPTl EPT | SLSWL Sequence Worm Screw Jack |
| SLP Sequence Planetary EPT | SLH/SLB Series Higher EPT EPT |
| NMRV Sequence Worm EPT | BKM Sequence Helical-hypoid EPT |
| SLRC Series Helical EPT | SLSMR Sequence Shaft Mounted EPT |
| SLXG Sequence Shaft Mounted EPT | X/B Sequence Cycloidal EPT |
| SLR/SEPT/SLK/SLS Collection Helical EPT | AC/DC EPT |
Major item listing: 16 collection incXiHu (West Lake) Dis.Hu (West Lake) Dis. SLR/SLS/SLK/SEPT collection tough tooth flank EPT EPT , SLRC series aluminium situation helical EPT EPTs,SLHSLB collection higher EPT velocity EPT, SLP sequence planetary speed EPT, X/B series cycloidal EPT, SLXG sequence shaft-mounted EPT box, SLSWL series worm screw jack, SLT sequence helical cone EPT box, entirely a lot more than ten,000 ratios, numerous specification make us at the head of domestic EPT industry, extensively provide the mechanical EPT area of ligEPT amp heavy industry these kinds of as: beer amp EPTrage, mining EPT, meals EPT, textile printing, rubber amp plastic content, petrochemical market, jack-up transportation, pharmacy amp procedure hides, environmental safety equipment.
Certificate
FAQ
1.Payment Term: TT, L/C
2.Shipping time: about thirty daEPTfrom EPT payment.
3.We accept tailored merchandise as for every your EPT necessity.
four.XiHu (West Lake) Dis.hu (West Lake) Dis.strains for the Variety:Typically we can select one EPT which is suited for you with some informations from you,these kinds of as ratio/motor speed/mounting dimension/ out torque and so on.
5.If the least orEPTamount is in surplus of $ten thousand, there are preferential.
Q1: What information should I tell you to affirm the product?
A:Product/Size, EPT Ratio, Shaft directions amp OrEPTquantity.
Q2: What can i do if I do not know which one particular EPT?
A:Dont fret, Send out as much data as you can, our team will support you uncover the rigEPT 1 you are seeking for.
Q3: What is your merchandise guarantee time period?
A:We provide one year guarantee since the vessel departure date still left EPT.
This fall: Are you trading business or maker ?
A: We are manufacturing unit.
Q5: How EPT is your shipping time?
A: EPTly it is five-ten daEPTif the goods are in inventory. or it is 15-20 daEPTif the merchandise are not in inventory, it is according to amount.
Q6: Do you give samples ? is it free of charge or added ?
A: Sure, we could provide the sample for free of charge demand but do not shell out the EPT of freight.
Q7: What is your terms of payment ?
A: Payment lt=1000USD, a hundred% EPT. Payment gt=1000USD, thirty% T/T EPT ,balance before shippment.
If you have one more issue, pls come to feel free to speak to us as underneath:
Make contact with Us